Faculty Publications

Faculty Publication List (ECE Program)

Dr. Abdul Khaliq
  1. M. Arshad, S. M. Islam, and A. Khaliq, “A Review Of Safety By Design Concept In Electric Utilities,” to be presented at AUPEC-2007, Perth, Australia, 9-12 December, 2007.

  2. M. Arshad, S. M. Islam, and A. Khaliq, “Power System Safety Management and Audit Protocols,” to be presented at AUPEC-2007, Perth, Australia, 9-12 December, 2007.

  3. M. Arshad, S. M. Islam, and A. Khaliq, "Power Transformer Asset Management," presented at International Conference on Power System Technology, POWERCON (IEEE PES), Singapore, 21-24 November, 2004.

  4. M. Arshad, A. Khaliq, and S. M. Islam, "Turbo Generator Stator Winding Condition Assessment," presented at POWERCON 2004, International Conference on Power System Technology (IEEE PES), Singapore, 21-24 November, 2004.

  5. M. Arshad, S. M. Islam and A. Khaliq, “Power Transformer Insulation Response and Risk Assessment” 8th International Conference on Probability Methods Applied to Power Systems September 12-16, 2004, Iowa, USA

  6. M. Arshad, S. M. Islam and A. Khaliq, “Power Transformer Aging and Life Extension” 8th International Conference on Probability Methods Applied to Power Systems September 12-16, 2004, Iowa, USA

  7. R. E. Ahmed and A. Khaliq “On the Role of Base Station In Fault-Tolerant Mobile Networks ", IEEE Canadian Conference on Electrical and Computer Engineering (CCECE 2004), Canada, May, 2004.

  8. A. Al-Ali, A. Khaliq and M Arshad, “GSM-Based Distribution Transformer Monitoring System”, Mediterranean Electro-technical Conference, MELECON 2004, May 12 – 15, 2004.

  9. R. E. Ahmed and A. Khaliq “A Low-Overhead Checkpointing Protocol for Mobile Networks", IEEE Canadian Conference on Electrical and Computer Engineering (CCECE 2003), Montreal, Canada, May 4-7, 2003.

  10. N. P. Khan, A. Khaliq and S. I. Shah, "Behavioral Analysis of Adaptive-Filtering Algorithms in Speech Echo-Cancellation", Proceedings of the Fourth IEEE National Multi Topic Conference, Islamabad, Pakistan September 2000.

  11. Saqib, M.A. and A. Khaliq, "Selecting a Miniature Fuse for Circuit Protection", Proceedings of the Fourth IEEE National Multi Topic Conference, Islamabad, Pakistan, September 2000.

Dr. Farrukh Kamran
  1. Farrukh Kamran, T. G. Habetler, “An Improved Deadbeat Rectifier Regulator Using a Neural Net Predictor,” in IEEE Transactions on Power Electronics (Impact Factor 1.75), vol. 10, no. 4, pp. 504-510, July 1995 Cited by 18

  2. Randy R. Schoen, Thomas G. Habetler, Farrukh Kamran, Rebert G. Bartheld, “Motor Bearing Damage Detection using Stator Current Monitoring,” in IEEE Transactions on Industry Applications (Impact Factor 0.96), vol. 31, no. 6 pp.1274-1279, Nov./Dec. 1995. Cited by 240

  3. Martin A. Brooke, B. Burton, T. Habetler, R. Harley, F. Kamran, R. Poddar: "Identification and Control of Induction Motor Stator Currents Using Fast On-Line Random Training of a Neural Network," IEEE Transaction on Industry Applications (Impact Factor 0.96), Vol. 33, No. 3, pp. 697-704, MAY/JUNE 1997 Cited by 42

  4. F. Kamran, T. G. Habetler, “A Novel ON-Line UPS with Universal Filtering Capabilities,” in IEEE Transactions on Power Electronics (Impact Factor 1.75), vol. 13, no. 3, pp. 410-418, May 1998. Cited by 67

  5. F. Kamran, Thomas G. Habetler: "Combined Deadbeat Control of a Series-parallel Converter Combination Used as a Universal Power Filter," IEEE Transaction on Power Electronics (Impact Factor 1.75), vol. 13, no. 1, pp. 160-168, 1998. Cited by 63

  6. F. Kamran, R. G. Harley, B. Burton, T. G. Habetler and M. A. Brooke, “A Fast ON-Line Neural Net Training Algorithm for a Rectifier Regulator,” in IEEE Transactions on Power Electronics (Impact Factor 1.75), vol. 13, no. 2, pp. 366-372, March 1998. Cited by 13

  7. F. Kamran, R.G. Harley, B.R. Burton, Thomas G. Habetler: "An On-Line Trained Neural Network with an Adaptive Learning Rate for a Wide Range of Power Electronic Applications," IEEE Power Electronics Specialists Conference Record, pp. 1499-1505, 1996. Cited by 2

  8. F. Kamran, A. Qayyum, Z. Ahmed, S. Zulfiqar, R. Ahmad, I. Elahi, “Efficient QoS Implementation for an Edge Network Device Handling IP and ATM Traffic” CDC 2002

  9. Arbab Waleed Ahmad, Dr.Farrukh Kamran “Optimum High Power Factor Power Converter Design for Small Sized Wind Turbines”, Proceedings IEEE INMIC2002

  10. S. Zulfiqar, Z. Ahmad, F. Kamran, “Time Ray Scheduling Algorithm for High Channel Density Applications”, Proceedings IEEE INMIC2002

  11. Omar Mukhtar, Zaheer Ahmed, Irfan Saeed and Farrukh Kamran, “Configurable POS & UTOPIA Level – II Interface”, Proceedings IEEE INMIC2002

  12. Farrukh Kamran, Zaheer Ahmad, Muhammad Omer Suleman, Zeeshan Anwar, Farhan Saleem Khan, Naveed Anis, Maliha Samad, Muhammad Faisal, Farid A. Qureshi, ”Integrated Verification Architecture for Multiprocessor System-on-Chip”, Proceedings IEEE INMIC2002

  13. Farrukh Kamran, Zaheer Ahmed, Murtaza Askari, Umair Bilal, Sameer Zulfiqar, “Binary Search Method Using A Hardware Table Assist”, Proceedings IEEE INMIC2002

  14. Zaheer Ahmed, Farrukh Kamran, Murtaza Askari, Sameer Zulfiqar, Usama Rauf, “ATM – AAL1 Machine”, Proceedings IEEE INMIC2002

  15. Naveed Bin Rais, Hammad A. Khan, Farrukh Kamran and Habibullah Jamal, “A new algorithm of Stereo matching using Epipolar Geometry” Proceedings IEEE INMIC 2003 (7th International Multitopic Conference, Dec. 8-9, 2003, Islamabad PAKISTAN), pp. 21 – 24.

  16. Syed M Alamdar Raza, Muhammad Akbar, Farrukh Kamran, "Object Model of Genetic Algorithms of Agents for Control of Distributed Renewable Energy Resources" , Inaugural IEEE PES 2005 Conference and Exposition in Africa Durban, South Africa, 11-15 July 2005, pp 282-285.

  17. Syed M Alamdar Raza, Muhammad Akbar, Farrukh Kamran, "Use Case Model of Genetic Algorithms of Agents for Control of Distributed Power System Networks", IEEE ICET 2005 Conference in Islamabad, 17-18 September 2005, pp 405-410.

  18. Syed M Alamdar Raza, Muhammad Akbar, Farrukh Kamran, "State Machine Model of Evolutionary Programs of Multi-Agent Systems for Control of Distributed Renewable Energy Networks", IUPAB Cairo Satellite Meeting of 15th International Biophysics Congress, 4-5 September 2005, Azhar Conference Centre Cairo, Egypt.

  19. Syed M Alamdar Raza, Muhammad Akbar, Farrukh Kamran, "Use Case Model of Genetic Algorithms of Agents-An Abstract Approach for Control of Complex Distributed Power System Networks" , North American Technology and Business Conference 2005 in Montreal Canada, 22-23 Sep 2005, serial 102, pp 1-12.

  20. Syed M Alamdar Raza, Muhammad Akbar, Farrukh Kamran, "Use Case, State Machine and Event Loop Model of Genetic Algorithms of Agents for Control of Distributed Power System Networks", SOAS 05 Workshop at University of Paisley, Glasgow, UK, 11-13 December 2005.

  21. Syed M Alamdar Raza, Farrukh Kamran, Muhammad Akbar, "Dynamic and Scenario Based Elicitation of Genetic Algorithms of Agents for Control of Distributed Power System Networks and Renewable Energy Resources”, IEEE ICM 2005 Conference, Islamabad, 13-15 December 2005, pp 148-154.

  22. Syed M Alamdar Raza, Farrukh Kamran, Muhammad Akbar, "State and Event Loop Model of Evolutionary Programs of Multi-Agent Systems for Control of Distributed Renewable Energy Networks", IEEE INMIC 05 Conference Karachi, 23-25 Dec 2005.

  23. Syed M Alamdar Raza, Muhammad Akbar, Farrukh Kamran, "Object Model of Genetic Algorithms of Agents for Control of Distributed Renewable Energy Resources" , Inaugural IEEE PES 2005 Conference and Exposition in Africa Durban, South Africa, 11-15 July 2005, pp 282-285.

  24. Syed M Alamdar Raza, Muhammad Akbar, Farrukh Kamran, "An Abstract Approach for Control of Complex Distributed Power System Networks”, International Journal of Information and Systems Sciences, Vol. 3, No. 1, 2007, pp. 116–128

  25. Arbab Waleed, Farrukh Kamran,” TANDEM-H Bridge A New Approach towards Low Switching Loss at High Switching Frequencies" IEEE ICET 2005 September 17-18, 2005, Islamabad, Pakistan

  26. Habibullah Baig, Farrukh Kamran, “Detection of Port and Network Scan Using Time Independent Feature Set”, Proceedings of IEEE International Conference on Intelligence and Security Informatics, ISI 2007, New Brunswick, New Jersey, USA, May 23-24, 2007, 180-184

  27. Habibullah Baig, Farrukh Kamran, “Detection of Low Intensity DOS Attacks Using Fuzzy Based Intrusion Detection System”, 4th International Conference on Electrical and Computer Engineering ICECE 2006, 19-21 December 2006, Dhaka, Bangladesh, pp 591-594.

  28. Mahmud, U., Iltaf , N., and Kamran, F., "Context Congregator: Gathering Contextual Information in CAPP", in proceedings of 5th international workshop on Frontiers of Information Technology, Islamabad, Pakistan, pp. 134-141, 17th-18th December, 2007. (ISBN: 978-969-8779-16-8)

  29. Naima Iltaf, Mukhtar Hussain and Farrukh Kamran, “A Mathematical Approach towards Trust Based Security in Pervasive Computing Environment”, Book chapter published by Springer's LNCS; Vol. 5576; Proceedings of the 3rd International Conference and Workshops on Advances in Information Security and Assurance Seoul, Korea, pp. 702 - 711 2009; ISBN:978-3-642-02616-4

Dr. Saeed-Ur-Rehman
  1. Kashif Altaf, Adeel Akhtar, Saeed-ur-Rehman and Javaid Iqbal, “Design, implementation and real-time digital control of a cart-mounted inverted pendulum using Atmel AVR Microcontroller”, Proceedings of the 6th WSEAS International Conference on Signal Processing, Robotics and Automation ,Greece, pp. 54—59, February 16-19, 2007.

  2. Manna Saeed, Yasar Ayaz and Saeed ur Rehman, “Design and Development of a Six-legged Robot with Simplified Control Architecture”, Proceedings of IEEE International Conference on Software Engineering Applications (ICSEA-2004), Islamabad, Pakistan, pp. 89—94, December 30-31 2004.

  3. Yasar Ayaz, Bilal Afzal, Mannan Saeed and Saeed ur Rehman, "Design, Fabrication and Control of a Two-Legged Walking Robot," Proceedings of the 4th International IEEE Workshop on Robot Motion and Control (RoMoCo’04)l, Poland, pp. 73--78, June 17-20, 2004.

  4. S. U. Rehman and D. G. Taylor, "Piecewise modeling and optimal commutation of switched reluctance motors," Proceedings of the International Symposium on Industrial Electronics, Athens, Greece, pp. 266--271, July 1995.

  5. S. U. Rehman and D. G. Taylor, "Issues in Position Estimation of SR motors," Proceedings of the 7th IEEE Power Electronics Specialists Conference, Baveno, Italy, pp. 337--343, June 1996.

  6. US Patent, "Method and Apparatus for control of a switched reluctance motor” by David G. Taylor and Saeed Ur Rehman (US Patent # 5,982,117 dated Nov. 09,1999)

  7. M. Rafiq, S.U. Rehman, Q.R. Butt and A.I. Bhatti, “Power Efficient Control of SR Motor for Speed Control Applications”, Proceedings of the 13th IEEE International Multi-topic Conference INMIC-2009 , Pakistan, pp. 1—6, December 15-17, 2009.

  8. Muhammad Rafiq, Saeed-ur-Rehman, Fazal-ur-Rehman, and Qarab Raza, “Power Efficient Higher Order Sliding Mode Control of SR Motor for Speed Control Applications”, IJCSI International Journal of Computer Science Issues, pp. 378—387, Vol. 8, No. 1, May 2011.

Dr. Muhammad Shamim Baig
  1. M.S.Baig & N.A.Alexandridis, “Workload Driven Reconfigurable / Partitionable Computer Architecture,” Sixth National Aeronautical Conference, Karachi, April 24-29, 1993.

  2. M.Ashraf, M.S Baig, L.A Khan & Ali Hassan, “Parallel Implementation of 2D-DWT by Purging Read After Write Dependency for High Speed Applications”. Proceedings of the IEEE Conference on Emerging Technologies (ICET 2007), Islamabad, Pakistan, 13-14 Nov, 2007

  3. M.S.Baig & N.A.Alexandridis, “Fault Tolerance of Reconfigurable / Partitionable MSIMD / MIMD Computer Architecture,” Proceedings of 7th National Aeronautical Conference, Risalpur, March 26-27, 1995, pp. 689-696.

  4. L.A Khan & M.S. Baig, “Reconstructing a Class of Cipher Systems used in Wireless Digital Communications”. Proceedings of the IEEE International Conference on Electrical Engineering, Lahore, Pakistan 11-12 April 2007.

  5. L. A. Khan, M. S. Baig and Ali Hassan. "Cryptanalysis of Stream Enciphered Speech Communication in a Keystream Reuse Situation." Mehran University Research Journal of Engineering & Technology, Vol. 29 No. 1, Jan, 2010.

  6. M.S.Baig, & N.A.Alexandridis, “Partition Control Scheme for Hierarchical MSIMD / MIMD Hypercube Computers,” Proceedings of ISMM International Symposium on Computer Applications in Design, Simulation and Analysis, Las Vegas, March 19-21,1991, pp.269-272.

  7. M.S.Baig, & N.A.Alexandridis, “Resource Allocation and Partition Configuration Algorithms for an Adaptable MSIMD / MIMD Hypercube Computer,” Proceedings of P.D.COM’91, IMACS-IFAC Symposium on Parallel and Distributed Computing in Engineering Systems, Corfu Greece, June 23-28, 1991.

  8. M.S.Baig, N.A.Alexandridis & T.EI-Ghazawi, “A Highly Reconfigurable Multiple SIMD/MIMD Architecture,” Proceedings of ISMM International Conference on Parallel and Distributed Computing Systems, Washington DC, Oct. 8-11, 1991.

  9. M.S.Baig, T.EI-Ghazawi & N.A.Alexandridis, “Task Scheduling and Performance Analysis of Partitionable MSIMD/MIMD Hypercube Computers,” Proceedings of ISMM International Conf. on Parallel and Distributed Computing Systems, Washington DC, Oct. 8-11, 1991

  10. M.S.Baig, N.A.Alexandridis & T.EI-Ghazawi, “Cost and Performance Analysis of partitionable SIMD/ MIMD Architectures,” Proceeding of ISMM International Conference on Computer Applications in Design, Simulation and Analysis, Orlando, Florida. March 11-13, 1992.

  11. M.S.Baig & N.A.Alexandridis, “Workload-Driven Partitionable MSIMD / MIMD Architecture,” Proceedings of European Workshop on Parallel and Distributed Systems (EWPC’92), Barcelona, Spain, March 23-27, 1992.

  12. M.S.Baig, T.EI-Ghazawi & N.A.Alexandridis, “Mixed-Mode Multicomputers with Load Adaptability,” Proceedings of Parallel Architectures and Languages Europe (PARLE’ 92), Paris, France, June 15-18, 1992, pp. 669-683.

  13. M.S.Baig & N.A.Alexandridis, “An Adaptable Approach for Partitioning MSIMD/MIMD Mesh Computers,” Proceedings of 30th Annual Allerton Conference on Communication, Control and Computing, Urbana, Sept 1992.

  14. M.S.Baig, T.EI-Ghazawi & N.A.Alexandridis, “Single Processor-Pool MSIMD / MIMD Architectures,” Proceedings of the 4th IEEE Symposium on Parallel & Distributed Processing, Arlington, Texas, December 1-4, 1992, pp. 460-467.

  15. M.S.Baig & N.A.Alexandridis, “An Adaptable Approach for Partitioning MSIMD / MIMD Hypercube Computers,” International Journal of Mini and Microcomputers, March 1993.

  16. M.S Baig, T. El-Ghazawi, & N. A.Alexandridis, “SPP: A Single-Pool Processor MSIMD/MIMD Architecture Model,” Proceeding of PARLE 92, Parallel Architectures & Languages Europe, Paris, France, June 15-18, 1992.

  17. M.S. Baig, T. El-Ghazawi, & N. A. Alexandridis, “Mixed-Mode Multicomputes with Load Adaptability”, Lecture Notes in Computer Science, Berlin: Springer-Verlag, Proceedings of the Parallel Architecture & Languages “Parle 92”, Paris, June 1992.

  18. M.S. Baig, “Adaptable Partition Control Scheme for Hierarchical & Reconfigurable MSIMD/MIMD Systems”, Technical Report, School of Engineering & Applied Sciences, George Washington University Washington DC, Dec 1990.

  19. M.S.Baig, “Dynamic Reconfiguration of Partitionable MSIMD/MIMD Parallel Processing Computer Systems,” PhD Thesis, School of Engineering & Applied Sciences, George Washington University, Washington DC, Dec 1991.

  20. Ali Hassan, Shamim Baig “Parallel Implementation of Spread Spectrum Based Oblivious Visual Watermarking Using Efficient DWT”, 6th WSEAS International Conference on Applied Computer Science (ACS ’06)Tenerife, Canary Islands, Spain, Dec 16-18, 2006, pp. 473-477.

  21. Ali Hassan, Shamim Baig, “Spread Spectrum Based Blind Watermarking Scheme for Multimedia Applications using Parallel DWT”, WSEAS Transactions on Computers, Issue 4, Volume 6, April 2007, ISSN 1109-2750, pp. 642-649.

  22. L.A Khan & M.S Baig & M. Ashraf, “Exploiting Silence for Ciphertext Only reconstruction of Stream Ciphered Digitized Voice”. The 2007 International Conference on Security and Management (SAM’07), Las Vegas, Nevada, USA, 25-28 June 2007.

  23. L. A. Khan & M.S Baig, “Cryptanalysis of Keystream Reuse in Stream Ciphered Digitized Speech using HMM based ASR Techniques”. International Conference on Computer Science and Applications, San Francisco, USA, 24-26 Oct 2007.

  24. Tariq Saeed, M. S. Baig, Muhammad Tariq "A Function-Parallel Architecture for High-Speed Network Intrusion Detection Systems" Accepted/ not presented in The 2008 World Congress in Computer Science, Computer Engineering, and Applied Computing.

  25. L.A. Khan & M.S Baig “Automated Cryptanalysis of Plaintext XORs of Waveform Encoded Speech.” IAENG International Journal of Computer Science, Volume 35 Issue 2, May, 2008, pp 234-241.

  26. Muhammad Tariq, M. S. Baig, M. Tariq Saeed, "Associating the Authentication and Connection-Establishment Phases in Passive Authorization Techniques”. International Conference on Information Security and Internet Engineering–World Congress on Engineering, London, UK, July 2008

  27. L. A. Khan & M. S. Baig. “A Server Based ASR Approach to Automated Cryptanalysis of Two Time Pads in Case of Speech.” Proceedings of the International Conference on Information Assurance and Security (IAS’08), pp 103-107, Naples, Italy, September, 2008. (http://www2.computer.org/portal/web/csdl/doi/10.1109/IAS.2008.14)

  28. L. A. Khan & M. S. Baig. “A Hidden Markov Model Based Speech Recognition Approach to Automated Cryptanalysis of Two Time Pads.” Advances in Computational Algorithms and Data Analysis, Lecture Notes in Electrical Engineering: Springer, Volume 14, pp159-168, Sep 2008. http://www.springerlink.com/content/mn1g511976312253/)

  29. L. A. Khan, M. S. Baig & Amr M. Youssef. "Speaker Recognition from Encrypted VoIP Communications." Accepted for publication in Digital Investigation an Elsevier Journal, 2009 (accepted 15 October, 2009, available online 10 November, 2009 http://www.sciencedirect.com/)

Dr. Shoab A. Khan
  1. Talha J. Ahmad, Hussnain Ali, Shoab A. Khan, S.M. Imran Majeed, “Heart Rate Variability Analysis using PP and RR Intervals”, Pakistan Armed Forces Medical Journal, submitted, July, 2009. (Cited by: 0)

  2. Hussnain Ali, Talha J. Ahmad, Shoab A. Khan, Farrukh Kamran, “Design of an Inductive Link for Medical Implants”, IEEE Symposium on Industrial Electronics & Applications, pp. 694-699, Kuala Lumpur, Malaysia, 4th-6th October 2009.

  3. Hussnain Ali, Talha J. Ahmad, Shoab A. Khan, Farrukh Kamran, “Mathematical Modeling of Inductive Link for Optimizing Efficiency”, IEEE Symposium on Industrial Electronics & Applications, pp. 831-835, Kuala Lumpur, Malaysia, 4th-6th October 2009.

  4. Talha J. Ahmad, Hussnain Ali, Shoab A. Khan, “Effect of Atrioventricular Conduction on Heart Rate Variability”, to be published, Computers in Cardiology 2009, Utah, USA, September 13-16, 2009.

  5. Hussnain Ali, Talha J. Ahmad, M. Asim Ajaz, Shoab A. Khan, “Laboratory Prototype of Cochlear Implant: Design and Techniques”, 31st Annual International IEEE EMBS Conference (IEEE EMBC), pp. 803-806, Minnesota, USA, September, 2009.

  6. Talha J. Ahmad, Hussnain Ali, M. Asim Ajaz, Shoab A. Khan, “Efficient Algorithm development of CIS Speech Processing Strategy for Cochlear Implants”, 31st Annual International IEEE EMBS Conference (IEEE EMBC), pp. 1270-1273, Minnesota, USA, September, 2009.

  7. Talha J. Ahmad, Hussnain Ali, Shoab A. Khan, “Classification of Phonocardiogram using an adaptive Fuzzy Inference System", The 2009 International Conference on Image Processing, Computer Vision, and Pattern Recognition (IPCV 2009), Las Vegas, USA, July, 2009.

  8. Talha J. Ahmad, Hussnain Ali, M. Asim Ajaz, Shoab A. Khan, “A DSK Based Simplified Speech Processing Module for Cochlear Implant Research”, 34th IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP), pp. 369-372, April, 2009. (Acceptance Rate: 1178/2633)

  9. Talha J. Ahmad, Hussnain Ali, Shoab A. Khan, “Statistical Fuzzy Classifier for Heart Sounds”, PAHCE 2008, pp. 7 – 12, California, January, 2008.

  10. Hussnain Ali, Talha J. Ahmad, Shoab A. Khan, S. M. Imran Majeed, “A Hybrid Network-based Cardiac Telemetric System: Design & Techniques”, 6th International Conference of Pakistan Heart Rhythm Society, Rawalpindi, Pakistan, February, 2009.

  11. Hussnain Ali, Talha J. Ahmad, Shoab Khan, “Adaptive Neuro Fuzzy Classifier for Phonocardiograms”, 6th IASTED International Conference on Biomedical Engineering, Innsbruck, Austria, February, 2008.

  12. Hussnain Ali, Talha J. Ahmad, Shoab A. Khan, “Heart Sound Signal Modeling and Segmentation based on Improved Shannon Energy Envelogram using Adaptive Windows”, Asialink International Conference on Biomedical Engineering, Jakarta, Indonesia ,October, 2007

  13. Naveed Ali, Shoab A. Khan, Naveed Sarfraz Khattak, Equivalency Checking of Arithmetic Data-Paths with Compound Word Length Operands, The 2007 World Congress in Computer Science, Computer Engineering & Applied Computing – World Comp 2007, Las Vegas, Nevada, USA

  14. Umar Farooq, Habibullah Jamal, and Shoab Ahmed Khan, "Realization of IIR Decimation Filters Based on Merged Delay Transformation," Research Letters in Signal Processing Volume 2007 (2007), Hindawi Publishing Corporation

  15. Muhammad Sohail Sadiq and Shoab A. Khan, "Optimal Mapping of DSP Algorithms on Commercially Available Off-The-Shelf (COTS) VLIW DSPs" IEEE Transactions on Consumer Electronics, Vol. 53, No. 3, AUGUST 2007

Dr. Sadia Aziz
  1. Muhammad Omer Farooq, Sadia Aziz, "QoS based Distributed Multipath Routing and Admission Control Algorithm for IPv6", 12th IEEE INMIC 23-24 December, 2008, Karachi Pakistan.

  2. Muhammad Omer Farooq, Sadia Aziz “DiffServ based admission control for IPv6”, Journal of Information Processing June 2009. Korean Information Processing Society.

  3. Ishtiaque Mahmood, Sadia Aziz “Fast node detection using AODV and GPS”, Intelligent Systems and Informatics, 2008. SISY 2008. 6th International Symposium, sept 2008. Serbia

  4. Sadia Aziz, Li LaYuan, Sun Qiang, “A simple Distributed Broadcasting Algorithm for Ad Hoc Networks,”. In the proceedings of 2006 International Symposium on Distributed Computing and Applications to Buisness, Engineering and Science, 102-107. DECABES 2006. Hangzhou, China.

  5. Sadia Aziz, Li LaYuan, Sun qiang, , “An Adaptive Distributed Broadcasting Algorithm for Ad Hoc Networks Based on Cross Layer”. In the proceedings of 2006 International Conference on Wireless Networks, ICWN 2006. Las Vegas, USA

  6. Sadia Aziz and Li LaYuan, “QoS support in Ad hoc Networks based on Cross Layer Design”. In the proceedings of IEEE International Conference on Information and Communication Technology, ICICT, 2007.

  7. Sadia Aziz and Li LaYuan, , “An Efficient Distributed Broadcasting Algorithm based on Cross Layer Design for Ad Hoc Networks”. Journal of Wuhan University of Technology 2007, EI(page 1),Wuhan,China

  8. Sun Qiang, Li LaYuan, Chen Niansheng, Sadia Aziz. “A Cross Layer Design for Broadcast Algorithm in MANETs,” In the proceedings of 2006 International Conference on Wireless Communications, Networking and Mobile Computing, WICOM2006, Wuhan,China.

  9. Gao Yefang, Li Layuan, Sadia Aziz. “DNPA: A Novel Distributed Nodes Positioning Algorithm for UWB Networks”. In the proceedings of 2006 Symposium on Information, Electronics, and Control Technologies(IECT’ 2006), 373-377. China.

  10. Muhammad Omer Farooq, Sadia Aziz "Stateless and Controlled Reservation Based DiffServ Model for Mobile Ad-hoc Networks". The Fourth International Conference on Wireless and Mobile Communications (IEEE Computer Society), Athens Greece July 27 – August 1, 2008.

  11. Muhammad Omer Farooq, Sadia Aziz, “Admission Control and Multipath Routing Algorithm for DiffServ Enabled Networks”, 3rd International Conference on Complex, Intelligent and Software Intensive System (IEEE Computer Society), March 16 -19, 2009, Fukuoka, Japan.

  12. Muhammad Omer Farooq, Sadia Aziz, and Abdul Basit Dogar3. “State of the Art in Wireless Sensor Networks Operating Systems: A Survey” In Proceedings of FGIT'2010. pp.616~631

Dr. Asad Mahmood
  1. A. Mahmood, J.C. Belfiore “3-dB Subgroup based Algorithm for Optimal Discrete Bit-Loading”, Accepted for publication, 2010, IEEE Transactions on Communications.

  2. S. M. S. Sadough, A. Mahmood, E. Jaffrot, P. Duhamel, “Multiband-OFDM: A New Physical Layer Proposal for Ultra Wideband Communications” , Journal of Iranian Association of Electrical and Electronics Engineers (IAEEE), 2007. (cited by 0)

  3. A. Mahmood, "Algorithm-Architecture Co-Optimization of Bit-Loading Algorithm for Delay Constrained Adaptive Wireless Systems", to present at IEEE Wicom, Beijing China Sept 24-26, 2009.

  4. A. Mahmood, J.C. Belfiore "Improved 3-dB Subgroup based Algorithm for Optimal Discrete Bit-Loading", Proc. IEEE Sarnoff Symposium, Princeton Univ. USA, 27-30 April, 2008.

  5. A. Mahmood, E. Jaffrot, “Computationally Efficient Algorithm for BER Optimized Power Allocation with Peak-Power Constraint”, Proc. IEEE VTC-Spring April 22-25 2007, Dublin, Ireland.

  6. A. Mahmood, E. Jaffrot, “Greedy Check Allocation for Irregular LDPC Codes Optimization in Multicarrier Systems”, Proc. IEEE WCNC Mar 11-15 2007, Hong Kong.

  7. A. Mahmood, E. Jaffrot, “New Efficient Method for Optimal Discrete Bit-Loading with Spectral Mask Constraints”, Proc. IEEE GLOBECOM Nov 27-Dec 1 2006, CA, USA.

  8. S. M. S. Sadough, A. Mahmood, E. Jaffrot, P. Duhamel, “Performance Evaluation of IEEE 802.15.3a Physical Layer Proposal Based on Multiband-OFDM”, Proc. IEEE IST’05 Sept. 9-12 2005, Shiraz, Iran.

  9. A. Mahmood, O. Hammami, “Hardware/Software Co-simulation of Adaptive MC-CDMA PHY layer for Wireless Communications”, Proc. IEEE ICM’05 Dec. 13-15 2005, Islamabad. Pakistan.

Dr. Zaheer Ahmed
  1. Zaheer Ahmed, Farrukh Kamran, Murtaza Askari, Sameer Zulfiqar , Usama Rauf “ATM – AAL1 Machine”, in INMIC 2002 , IEEE Inc. Pakistan Section.

  2. Rizwana Mehboob, Shoab A. Khan, Zaheer Ahmed, Habibullah Jamal, Muhammad Shahbaz, “Multigig Lossless Data Compression Device” IEEE Transactions on Consumer Electronics, Vol. 56, issue 3, August 2010, pages 1927-1932.

  3. Zaheer Ahmed, Habibullah Jamal, Rizwana Mehboob, Shoab Khan, Muhammad Shahbaz “Secure Cognitive Mobile Hotspot” IEEE Transactions on Consumer Electronics, Vol. 56, issue 2, May 2010, pages 606-612.

  4. Zaheer Ahmed, Habibullah Jamal, Rizwana Mehboob, Shoab Khan, Asrar Ashraf “Cognitive Communication Device for Vehicular Networking” IEEE Transactions on Consumer Electronics, Vol. 55, issue 2, May 2009, pages 371-375.

  5. Zaheer Ahmed, Habibullah Jamal, Rizwana Mehboob, Shoab Khan “A Navigation Device with MAC Supporting Multiple Physical Networks for Extended Coverage and Operations” IEEE Transactions on Consumer Electronics, Vol. 54, issue 3, August 2008, pages 1103-1109.

  6. Rizwana Mehboob, Shoab A Khan, Zaheer Ahmed “High Speed Lossless Data Compression System” in 10th IEEE International multi-topic conference December 2006 Islamabad Pakistan.

  7. Zaheer Ahmed, M. Mohsin Rahmatullah, Habibullah Jamal “Security Processor for Bulk Encryption” in international Conference ICM 2004 Tunisia

  8. Zaheer Ahmed, Rizwana Mehboob, Shoab A Khan, Habibullah Jamal “Dynamic Mission Critical Network for Mobile System” in international Conference ICM 2004 Tunisia

  9. Zaheer Ahmed, Sheikh M. Farhan, Rizwana Mehboob, Shoab Khan, Habibullah Jamal “CONFIGURABLE NETWORK FOR MOBILE SYSTEM” in International Conference on Electrical, Electronic and Computer Engineering ICEEC’04

  10. Zaheer Ahmed, M. Mohsin Rahmatullah, Habibullah Jamal “Reconfigurable Programmable Security Processor” in ISSA conference South Africa June 30 to July 2, 2004.

  11. Faiza Younas Janjua , Samia Sultan , Mariam Muzaffar , Zaheer Ahmed , Dr. Shoab A Khan,“Authenticated Routing of Table Driven Protocol in an Ad hoc Environment” IEEE INCC2004.

  12. Zaheer Ahmed, Shoab Khan “Development of a Programmable Multiplierless Viterbi Accelerator “, in INMIC 2000 , IEEE Inc. Pakistan Section.

  13. Zaheer Ahmed, Shoab Khan, I. Elahi “Development of Complex Architectures using ERTL Language”, in INMIC 2000 , IEEE Inc. Pakistan Section.

  14. Farrukh Kamran, Zaheer Ahmed, Murtaza Askari, Umair Bilal, Sameer Zulfiqar “Binary Search Method Using A Hardware Table Assist”, in INMIC 2002 , IEEE Inc. Pakistan Section.

  15. Farrukh Kamran, Zaheer Ahmad, Muhammad Omer Suleman, Zeeshan Anwar, Farhan Saleem Khan, Naveed Anis, Maliha Samad, Muhammad Faisal, Farid A. Qureshi “Integrated Verification Architecture for Multiprocessor System-on-Chip”, in INMIC 2002 , IEEE Inc. Pakistan Section.

  16. Omar Mukhtar, Zaheer Ahmed, Irfan Saeed and Farrukh Kamran “Configurable POS & UTOPIA Level – II Interface”, in INMIC 2002 , IEEE Inc. Pakistan Section.

  17. S. Zulfiqar, Z. Ahmad, F. Kamran “Time Ray Scheduling Algorithm for High Channel Density Applications”, in INMIC 2002 , IEEE Inc. Pakistan Section.

  18. F. Kamran, A. Qayyum, Z. Ahmed, S. Zulfiqar, R. Ahmad, I. Elahi “Efficient QoS Implementation for an Edge Network Device Handling IP and ATM Traffic”, in Communications Design Conference September 23-26, 2002.

  19. Zaheer Ahmed, Rizwana Mehboob, Shafaat Ali. “Mini Control Room for Nuclear Power Plant Analyzer”, in INMIC 98, Third Multi-Topic Conference, IEEE Inc. Pakistan Section

Dr. M. Mohsin Rahmatullah
  1. Rahmatullah, M.M.; Khan, S.A.; Jamal, H. “Carrier Class High Density VoIP Media Gateway using Hardware Software Distributed Architecture” IEEE Transactions on Consumer Electronics Vol 53, Issue 4, Nov. 2007

  2. Ahmed, Z.; Rahmatullah, M.; Jamal, H. “Security Processor for Bulk Encryption” 16th International Conference on Microelectronics, ICM Dec 2004 Tunis, Tunisia.

  3. Rahmatullah, M.; Khan, S.; Farhan, S.; Jamal, H. “Reconfigurable Media Processing System for IP Based Communication Application”, Proceedings of the 2004 International Conf. on Electrical, Electronic & Computer Engineering, Sept 2004, Cairo, Egypt

  4. Farhan, S.; Jamal, H.; and Rahmatullah, M. “High Data Rate 8-bit crypto-processor.” ISSA 2004 Enabling Tomorrow Conference, July 2004, Gallagher Estate, Midrand, SA.

  5. Ahmed, Z.; Rahmatullah, M.; Jamal, H. “Re-configurable Programmable Security Processor for Network Application” ISSA 2004 Enabling Tomorrow Conference, July 2004, Gallagher Estate, Midrand, SA.

Dr. A. Hasan
  1. Ali Z. and A. Hasan, “Stochastic Geometry of Thinned Nodes in Ad Hoc Networks” submitted to Mathematical and Computer Modelling.

  2. A. Hasan and J. G. Andrews, “Guard Zone-based Scheduling in Ad hoc Networks” under revision to IEEE Trans. on Wireless Communications.(2008)

  3. A. Hasan and J. G. Andrews, “The Guard Zone in Wireless Ad Hoc Networks”, in IEEE Trans. on Wireless Communications, March, 2007.

  4. J. G. Andrews and A. Hasan, “Issues in CDMA Ad Hoc Networks”, invited paper, IEE Communications Engineer, Feb. 2004.

  5. A. Hasan, Muhammad Ali and Zahid Ali, “Modeling Aggregate Interference in Ad Hoc Networks”, invited paper in Proc. IEEE IBCAST, Jan. 2010.

  6. A. Hasan, “Increasing Concurrent Transmissions in CDMA Ad hoc Networks”, in Proc. IEEE IBCAST, Jan. 2009.

  7. A. Hasan and J. G. Andrews, “Interference Cancellation vs. Interference Suppression in Ad Hoc Networks”, in Proc. IEEE MILCOM, Nov. 2008.

  8. Khan M. A and A. Hasan "Improved Nonce Construction for AES CCMP to Evade Initial Counter Prediction", in Ninth ACIS International Conf. on Software Engineering, SNPD2008, Aug, 2008.

  9. Khan M. A and A. Hasan "Pseudo Random Number Based Authentication To Counter Denial of Service Attacks on 802.11", in Fifth IEEE International Conference, WOCN, May 2008.

  10. A. Hasan and J. G. Andrews, “Scheduling Using Near-optimal Guard Zones for CDMA Ad Hoc Networks”, in ICC, Jul. 2006.

  11. X. Yang, A. Hasan, G. de Veciana and J. G. Andrews, “MAC Protocols for Spread Spectrum Ad Hoc Networks: Spatial Thinning vs. Packing”, in Proc. CISS, Mar. 2005.

  12. A. Hasan and J. G. Andrews, “The Critical Radius in CDMA Ad hoc Networks”, in Proc. IEEE Globecom, Dec. 2004.

  13. A. Samant and A. Hasan, “Rapid Prototyping and Test Platform for Multi-Carrier OFDM”, in Proc. WNCG Symposium, Oct. 2004.

  14. A Hasan and J. G. Andrews, “Cancellation Error Statistics in a Power-Controlled CDMA System using Successive Interference Cancellation”, in Proc. IEEE ISSSTA, Aug. 2004.

  15. A. Hasan, K. Yang and J. G. Andrews, “Clustered CDMA Ad Hoc Networks without Closed-Loop Power Control”, in Proc. IEEE MILCOM, Oct. 2003.

  16. A Hasan and J. G. Andrews, “Cancellation Error Statistics in a CDMA System using Successive Interference Cancellation”, in Proc. Allerton, Oct. 2003.

Dr. A. Mahmood
  1. Asif Mahmood Mughal and Kamran Iqbal, “3D bipedal model with holonomic constrained for decoupled optimal controller design of biomechanical sit-to-stand maneuver,” ASME Journal of Biomechanical Engineering, accepted

  2. Asif Mahmood Mughal & Kamran Iqbal, “Human bipedal biomechanical modeling with Maple’s DynaFlexPro”, SAE Journal of Passenger Car: Mechanical Systems (Most Outstanding paper in SAE conf. on Digital Human Modeling 2007), Section 6, Volume 116, pp2045-2054, August 2008.

  3. R. Ahangar, K. Iqbal, A.M. Mughal, “Finite difference simulation of a multi-stage carcinogenesis model”, WSEAS Transactions on Mathematics and Computers in Biology and Biomedicine, Vol. 3, No. 4, pp285-290, April 2006.

  4. Asif Mahmood Mughal, “Statistical method to maintain a point value standard in a Lab”, CAL LAB - The International Journal of Metrology, Vol. 10, No. 4, Jan 2004.

  5. Asif M. Mughal and Kamran Iqbal, “Bond graph modeling and optimal control design for physiological motor control system”, ASME Journal of Dynamical Systems, Measurement and Control, accepted & under revision

  6. Asif M Mughal and Kamran Iqbal, “Optimal control of sit-to-stand movement using a fuzzy biomechanical model”, Journal of Computational Modeling and Engineering, submitted Kamran Iqbal and Asif Mahmood Mughal, “Physiological LQR design for postural control and coordination of sit-to-stand movement, J. Mathematical Modeling of Dynamical Systems, submitted.

  7. Asif M. Mughal and Kamran Iqbal, “Controller design by decoupling of angular planes for bipedal sit-to stand movement”, 11th Intl. IASTED Conf. on Control and Application, Cambridge, UK, 13- 15 July 09.

  8. Asif M. Mughal and Kamran Iqbal, “Bipedal Modeling and Decoupled Optimal Control Design of Biomechanical Sit-to-Stand Transfer”, IEEE workshop on robotics and sensor environment, pp46- 51, Ottawa, 17-18 Oct 2008.

  9. Asif Mahmood Mughal and Kamran Iqbal, “Fuzzy modeling and optimal control of biomechanicalsit-to- stand movement”, The 10th International Conference on Variable Structures, Istanbul, Turkey, 8-10 June, 2008.

  10. Asif M. Mughal and Kamran Iqbal, “Analytical symmetrical and asymmetrical bipedal models with holonomic constraints”, 19th Intl. IASTED Conf. on Modeling and Simulation, Quebec City, Canada, 26-28 May 08.

  11. Asif M. Mughal and Kamran Iqbal, “Biomechanical bipedal model with asymmetrical reference trajectories for sit-to-stand task”, 2nd International conference on Electrical Engineering, Pakistan, pp1-6, 25-26 March 08.

  12. Asif M. Mughal and Kamran Iqbal, “Biomechanical modeling using Maple’s DynaFlexPro”, SIAM Conference on Application of Dynamical Systems, Snowbird, UT, May 28- June 1, 2007.

  13. Asif M. Mughal and K. Iqbal, “Physiological cost optimization for bipedal modeling with optimal controller design”, International Conference on Computational & Experimental Engineering and Sciences, Vol. 235, No. 1, pp1-6, Honolulu, HI,USA, 17-22 March 2008.

  14. Asif M. Mughal and Kamran Iqbal, “Synthesis of angular profiles for bipedal sit-to-stand movement”, 40th IEEE Southeastern Symposium on System Theory, pp293-297, New Orleans, LA, USA, 17-18 March 2008.

  15. Asif M. Mughal and Kamran Iqbal, “Active control vs. passive stiffness in posture and movement coordination”, IEEE International Conference on Systems, Man and Cybernetics, pp3376-3372, Montreal, 7-10 October 2007.

  16. Asif Mahmood Mughal and Kamran Iqbal, “Human bipedal biomechanical modeling with DynaFlexPro”, SAE transactions on Digital Human Modeling for Design and Engineering”, Seattle, WA, USA, June 12-14, 2007.

  17. Asif M. Mughal and Kamran Iqbal, “Physiological cost optimization of sit to stand transfer”, IEEE R5 Technical, Professional, and Student Conference, pp147-152, Fayetteville, AR, April 20-22, 2007.

  18. Asif M. Mughal and Kamran Iqbal, “Bond graph modeling of physiological motor control with H∞ controller design”, IEEE International Conf. of Control Applications”, pp947-952, Munich, Germany, Oct. 4-6, 2006.

  19. Asif M Mughal and Kamran Iqbal, “Analysis of physiological motor control with bond graph modelling and LQR Design, IFAC Symposium on Modelling and Control in Biomedical Systems, Reims, France, Sept. 20-22, 2006.

  20. Asif M Mughal and Kamran Iqbal, “A fuzzy biomechanical model with H2 optimal control of sit to stand movement, Proc. of the 2006 American Control Conference, pp3427-3432, Minneapolis, MN, June 14-16, 2006.

  21. Asif M. Mughal, Xiu Ye and Kamran Iqbal, “Computational algorithm for higher order Legendre polynomial and Gaussian quadrature method”, International Conf. on Scientific Computing, Las Vegas, NV, June 26-29, 2006

  22. A. M. Mughal and K. Iqbal, “A Fuzzy Biomechanical Model for Optimal Control of Sit-to-Stand Movement”, IEEE Intl. Conf. of Engineering of Intelligent systems, pp1-6, Islamabad, Pakistan, April 22-23, 2006.

  23. Asif Mughal and Kamran Iqbal, “A fuzzy biomechanical model for optimal control of sit-to-stand movement”, Proc. of IEEE Conf. on Computational Intelligence: Methods and Applications, Istanbul, Turkey, Dec 15-17, 2005.

  24. A. M. Mughal & K. Iqbal, “A fuzzy biomechanical model for H∞ suboptimal control of sit-to-stand Movement”, Proc. of the Eighth IASTED International Conference on Intelligent Systems and Control, pp374-379, Cambridge, MA, USA, Oct-31 - Nov 2, 2005.

  25. A. M. Mughal, Q. R. Butt and A. A. Malik, “Bond graph modeling and simulation of a piezoelectric accelerometer system”, Proc. of the Eighth IASTED International Conference on Intelligent Systems and Control, pp155-160, Cambridge, MA, USA, Oct31 - Nov 2, 2005.

  26. Asif M Mughal, Kamran Iqbal & Swaminadham Midturi, “Self-tuning active vibration control in flexible beam by neural network” Proc. of the International Conference on Computing, Communications and Control Technologies: CCCT04, pp194-199, Austin, TX, USA, August 13-17, 2004.

  27. A. M Mughal and K. Iqbal, “A bond graph model of bilateral master-slave tele-manipulation”, Proc. of the Fifth IASTED International Conference on Modeling and Simulation, pp362-367, Marina Del Rey, CA, USA, March 1-3, 2004

  28. Asif Mahmood Mughal, “Data acquisition of mechanical shock and vibration for simulation of road transportation test on electromagnetic shaker”, Proc. of the 2nd International Bhurbun Conference on Applied Sciences & Technology, pp583-591, Bhurban, Pakistan, June 16-23, 2003

Dr. M. Hasan Islam
  1. “A Heuristic Approach for Qualitative Risk Assessment and Treatment Model”, Journal of Information Assurance and Security, vol6, 2011

  2. “Optimal Sensor Placement for Detection against Distributed Denial of Service Attacks”, Pakistan Journal of Engineering and Applied Sciences, vol4, Jan 2009 (p. 80-92)

  3. “Cloud Computing Security Auditing” International Conference on Next Generation Information Technology (ICNIT) 2011

  4. “Design and Implementation of PKI” ICFN 2011

  5. “Automating the process of disaster management using latest technologies” ICCAE 2011

  6. “Comparative analysis of Risk Assessment in Strategic and Commercial organization” ICCNSS 2010

  7. “Measuring the Information Agility in Request Based Network Centric Warfare (NCW), ”Eleventh National Research Conference on Management and Computer Science, 2010

  8. “Analytical Evaluation of the Existing key Exchange Protocols & Future Prospects of key Management in DTNs ” ICUT, 2009

  9. “Fully Distributed Dynamically Configurable Firewall to Resist DOS Attacks In MANET”, NDT 2009

  10. “Optimal placement of Detection Nodes for Ad hoc networks”, NDT 2009

  11. “User Authentication for Mobile Device through Image Selection”, NDT 2009

  12. “Detection of Selfish Nodes in Peer-To-Peer Networks”, NDT 2009

  13. “A Short Survey on Distributed In-Network Query Processing in Wireless Sensor Networks”, NDT 2009

  14. “An Efficient Gossip Based Overlay Network For P2P Networks", ICUFN 2009

  15. “Wearable Body Area networks”, ICIME 2009

  16. “Optimal Placement of Sensor for Detection against Distributed Denial of Service Attacks”, IEEE, ICACC 2009

  17. “Efficient Placement of Sensor for Detection against Distributed Denial of Service Attacks”, IEEE, Innovations 2008

  18. “Incorporation of Data Integrity in Gossip Based Overlay Network”, IEEE, ICET 2008

  19. “Adaptive Trust Aware Management Scheme for Protecting Against Insight Threats” IEEE, ICET 2008

  20. “An Improved Mean and Standard Deviation Model for Anomaly Based Intrusion Detection” International Conference on Statistics and Operation Research, Lahore, 2006

  21. “802.11 Disassociation DoS Attack and Its Solutions A Survey” MCWC Sep 2006

  22. “Pseudo Randomized Sequence Number Based Solution to 802.11 Disassociation Denial of Service Attack” MCWC Sep 2006

  23. “Policy Enforcement in Peer-to-Peer Networks Using Open Source Tools” ICOST 2006

  24. “Taxonomy of Statistical Based Anomaly Detection Techniques for Intrusion Detection” IEEE, ICET, 2005

  25. “Congestion Control Scheme for Data Traffic on ATM LANS”, IEEE, INIC98 Nov 1998

  26. “Rate Based Congestion Control Scheme for Data Traffic on ATM LANs”, IEEE, INIC98, Nov 1998

Dr. Adnan A. Khan
  1. A. Khan, S. Bashir, S. I. Shah and A. U. Sheikh, " Binary Ant Colony Algorithm for Symbol Detection in a Spatial Multiplexing System," LNCS 4618, Springer-Verlag Berlin Heidelberg, pp. 115-126, 2007. (http://www.springerlink.com/content/5730u45822761r44/)

  2. A. Khan, S. I. Shah and Xiaodong Li, "Symbol Detection in Spatial Multiplexing System using Particle Swarm Optimization Meta-heuristics," International Journal of Communications System, John Wiley Sons, 2008. (http://www3.interscience.wiley.com/journal/121411672/abstract?CRETRY=1&SRETRY=0)

  3. A. Khan, and S. I. Shah, "Meta-heuristics for Symbol Detection in a Spatial Multiplexing system," NUST Journal of Engineering and Sciences. 2009.

  4. S. Bashir, A. Khan, M. Naeem and S. I. Shah, "An Application of Univariate Marginal Distribution Algorithm in MIMO Communication Systems," International Journal of Communications System, John Wiley Sons, 2009. (http://www3.interscience.wiley.com/journal/122582217/abstract)

  5. I. Shafi and A. Khan “High resolution time-frequency methods’ performance analysis” EURASIP Journal on Advances in Signal Processing. 2010

  6. I. Shafi and A. Khan “Validity guided fuzzy clustering evaluation for neural network based timefrequency reassignment” ” EURASIP Journal on Advances in Signal Processing. 2010

  7. K. Khursheed and A. Khan, “An application of Classical Ant Colony Optimization (ACO) for symbol detection in Spatial Multiplexing Systems” accepted for publication in International Journal of Communications System, John Wiley Sons.

  8. A. Khan, S. Bashir, and S. I. Shah, "An Analysis of the effects of Multiple Access Interference in DSCDMA Reverse Link," in Proc. IEEE Int. Conference on Emerging Technologies (ICET 2005), Islamabad Pakistan, pp. 182-187, September 2005.

  9. A. Khan, S. Bashir, M. Naeem and S. I. Shah, “Heuristics assisted detection in High speed Wireless Communication Systems”, in Proc. IEEE Int. Conf. (INMIC'06), Islamabad, Pakistan, pp. 1-5, December 2006.

  10. A. Khan, M. Naeem, and S. I. Shah, “A Particle Swarm Algorithm for Symbols Detection in Wideband Spatial Multiplexing Systems”, in Proc. Genetic and Evolutionary Computation Conference (GECCO), UK, London, pp. 63-70, 9-11 July 2007.

  11. A. Khan, S. Bashir, S. I. Shah and A. U. Sheikh, " Binary Ant Colony Algorithm for Symbol Detection in a Spatial Multiplexing System,“ in Proc. 6th International Conference on Unconventional Computation (UC 2007), Canada, pp. 115-126, August 2007.

  12. K. T. Tasneem, A. A. Khan, S. Bashir, S. I. Shah, “Spatial Multiplexing System using Orthogonal Data Streams”, In Proc. of 3rd IEEE ICET, Islamabad, pp. 17-21, November 2007.

  13. A. Khan, K. T. Tasneem, S. Bashir and S. I. Shah, “Low Complexity Near Optimal MIMO Decoding Based On Nature Inspired Techniques”, 5th International Workshop on Frontiers of Information Technology, Islamabad, December 2007.

  14. A. Khan and S. I. Shah, “Simplified Maximum Likelihood Detection for Hi Orthogonal Space-Time Block Coded System”, 2nd IEEE International Conference on Computers, Controls and Communications, Feb 2009.

  15. A. Khan, S. Irteza and S. I. Shah, “Analysis of Detection Schemes in MIMO Spatially Correlated Channels”, IEEE Symposium on Industrial Electronics and Applications, 2009, Malaysia.

  16. A. Khan, S. Irteza and S. I. Shah, “Improved ZF-ML Decoder for Space-Time Block Codes over Time Selective Channels”, IEEE Symposium on Industrial Electronics and Applications, 2009, Malaysia.

  17. A. Khan, S. Irteza, K. Riaz, and S. I, Shah “Efficient Detection of Space Time Block Codes in Time-Selective Channels via Sphere Decoder”, 5th IEEE International Conference on Emerging Technologies 2009 (ICET 2009).

  18. A. Khan, K. Kursheed and S. Irteza, “Analysis of Ant Colony Optimization in MIMO Detection” IEEE Congress on Evolutionary Computing (CEC-2010).

  19. M. Farooq, S. A. Khan, and A. A. Khan, “Hostname Addressing in Heterogeneous Mobile Ad hoc Networks”, 3rd IEEE International Conference on Computer Science and Information Technology, (ICCSIT 2010) China.

Dr. Faisal Mufti
  1. F. Mufti, R. Mahony, Statistical analysis of measurement processes for time-of-flight cameras, in: Proc. SPIE Image and signal processing: Videometrics, Range Imaging, and Applications X, San Diego, USA, 2009.

  2. F. Mufti and R. Mahony, Radiometric Range Image Filtering for Time-of-Flight Cameras, in: Proc. 5th International Conf. on Computer Vision Theory and Applications, France, May 2010.

  3. F. Mufti and R. Mahony, Radiometric Range Analysis of Time-of-Flight Cameras and Applications, Computer Vision and Image Understanding.

  4. F. Mufti and R. Mahony, Statistical Analysis of Signal Measurement in Time-of-Flight Cameras, ISPRS Journal of Photogrammetry and Remote Sensing.

  5. F. Mufti, R. Mahony, J. Heinzmann, Spatio-Temporal RANSAC for Robust Estimation of Planar Surfaces in Video Range Images for Automotive Applications, in: Proc. 11th IEEE Intl. Conf Intelligent Transportation Systems, Beijing, China, Oct. 2008.

  6. F. Mufti, R. Mahony, and J. Kim, Super-resolution of speed signs in video sequences, in: Proc. 9th Biennial Conf. Digital Image Computing Techniques and Applications (DICTA’07), Glenelg, Australia, Dec. 2007.

  7. F. Mufti, R. Mahony, and J. Heinzmann, Robust Estimation of Planar Surfaces using Spatio-Temporal RANSAC for Applications in Autonomous Vehicle Navigation, Robotics and Autonomous Systems.

  8. F. Mufti, R. Mahony, and J. Kim, Super Resolution of Moving Objects in Video Sequences, IET Journal of Computer Vision.

Dr. Tahir Zaidi
  1. S. Gupta, T. Zaidi, M. H. Kane, and I. T. Ferguson, “Topical Review: Transition metal and rare earth doping of GaN”, Physica Status Solidi (B), in press, Invited paper.

  2. W. E. Fenwick, M.H. Kane, R. Varatharajan, T. Zaidi, Z.Fang, B. Nemeth, D. J. Keeble, H. El-Mkami, G.M. Smith, J. Nause, C.J. Summers, I.T. Ferguson, “Transition metal- and rare earth-doped ZnO: a comparison of optical, magnetic, and structural behavior of bulk and thin films”, Proceedings of the SPIE - The International Society for Optical Engineering, v 6474, p 64741Q-1-8, 2007

  3. M. Jamil , T. Xu, T. Zaidi, A. Melton, B. Jampana, C.L. Tan, B.S. Ooi, I. T. Ferguson, “physica status solidi (a), online on 15 Apr 2010, Accepted for print

  4. A. Melton, S. Gupta, E. Malguth, W.E. Fenwick, T. Zaidi, H. Yu, I. T. Ferguson, “Rare Earth Doping of GaN with Gadolinium by MOCVD”, MRS Proceedings Fall 2008

  5. T. Zaidi, M. Jamil, A. Melton, N. Li, W. E. Fenwick, I. T. Ferguson, “ NH3 Doping in MOCVD Growth of ZnO Thin Films”, MRS Fall 2008

  6. M. Jamil, T. Zaidi, A. Melton, S. Gupta, W. Fenwick, E. Malguth, I. T. Ferguson, “MOCVD Growth of Ferromagnetic Ga Gd N and Effect of Co-Doping”, ICNS-8, Oct 2009

  7. T. Zaidi, M. Jamil, A. Melton, and I. T. Ferguson, “Liquid injection MOCVD growth of BiFeO3 thin films on GaN”, MRS Fall 2009

  8. M. Jamil, T. Xu, T. Zaidi, A. Melton, I. T. Ferguson, C.L. Tan and B.S. Ooi, “Controlled Epitaxy and Characteristics of InN Nanopyramids by MOCVD”, MRS, Fall 2009

  9. A. Melton, E. Burgett, M. Jamil, T. Zaidi, N. Hertel, I. T. Ferguson, “GaN As a Neutron Detection Material”, IEEE Southeastcon, Mar 2010

  10. T. Zaidi, W. E. Fenwick, A. Melton, N. Li, S. Gupta, H. B. Yu, A. Ougazzaden, and I.T. Ferguson, “Effects of N doping on ZnO thin films grown by MOVPE”, Journal of Crystal Growth, vol. 310, pp. 5011-5015, 2008.

  11. T. Zaidi, A. Melton, M. Jamil, W.E. Fenwick, I. T. Ferguson, “n-type, p-type and Semi-insulating ZnO:N thin films Growth by MOCVD with NH3 Doping”, Journal of Vacuum Science and Technology June, 2009

  12. W. E. Fenwick, T. Zaidi, S. Gupta, H. Yu, A. Melton, A. Ougazzaden, and I. T. Ferguson ,“Effects of group V doping and III-N Co-Doping on ZnO thin films grown by MOVPE “, Proc. IC MOVPE, 2008, pp. 205.

  13. W. E. Fenwick, S. Gupta, H. Yu, A. Melton, T. Zaidi, A. Ougazzaden, and I. Ferguson, “MOCVD growth of transition-metal doped GaN and ZnO for spintronic applications”, IC MOVPE, June 01-06, 2008.

  14. S. Gupta, W. E. Fenwick, A. Melton, T. Zaidi, H.Yu, V. Rengarajan, J. Nause, A. Ougazzaden, I. T. Ferguson, “MOVPE growth of transition-metal-doped GaN and ZnO for spintronic applications”, Journal of Crystal Growth, v 310, n 23, p 5032-8, 15 Nov. 2008

  15. T. Zaidi, M. H. Kane, S. Gupta, N. Li, W. E. Fenwick, M. Han, Z. J. Zhang, C. Summers and I. T. Ferguson, “Magnetic and Optical properties of Ga(Cr, Mn, Fe)N grown by Metal Organic Chemical Vapor Deposition”, 52nd Magnetism and Magnetic Materials Conference, Tampa, FL, November 5-9, 2007

  16. S. Gupta; H. Kang; M. Kane; E.H. Park; T. Zaidi; I.T. Ferguson, “Growth and Magnetization Study of Transition Metal Doped GaN Nanostructures”; 7th Int'l Conference of Nitride Semiconductors (ICNS-7) Las Vegas, NV, Sept. 16-21, 2007

  17. S. Wang; N. Li; E.H. Park; Z. Feng; A. Valencia; J. Nause; M. Kane; T. Zaidi; I.T. Ferguson; “Metalorganic Chemical Vapor Deposition of InGaN Layers on ZnO Substrates”; 7th Int'l Conference of Nitride Semiconductors (ICNS-7) Las Vegas, NV, Sept. 16-21, 2007

  18. M. Kane, S. Gupta, W. Fenwick; M. Han; Z. Zhang; T. Zaidi; I.T. Ferguson; “Comparison of Transition Metal Incorporation and Phase Segregation in MOCVD-Grown Ga(Fe,Mn)N”; 7th Int'l Conference of Nitride Semiconductors (ICNS-7) Las Vegas, NV, Sept. 16-21, 2007

  19. W.E. Fenwick, M.H. Kane, Z.Fang; T. Zaidi, N. Li; V. Rengarajan, J. Nause, I.T. Ferguson, “Transition metal-doped ZnO: a comparison of optical, magnetic, and structural behavior of bulk and thin films”, Zinc Oxide and Related Materials Symposium, p 55-60, 2007

  20. O. Hitzemann, M. Kaiser, E. Malguth, M. R. Wagner, J. H.. Schulze, A. Hoffmann, S. Gupta, T. Zaidi, I.T. Ferguson, M. Röver, D.D. Mai, J. Malindretos, and A. Rizzi, “Optical measurements on Gd doped GaN“, EMRS, Regensburg 2010

  21. T. Zaidi, A. Melton, M. Jamil, B. Jampana, T. Xu, and I. T. Ferguson, "Spin polarized light emitting diode with Ga1-xGdxN injection layer," Accepted, SPIE Tenth International Conference on Solid State Lighting, Aug 2010

Faculty Publication List (EM Program)

Dr. Nadeem Ehsan
  1. “Cost and Fatigue Damage Analysis of Static and Dynamic Loads on Flexible Pavements” Nadeem Ehsan, Thesis, Ph. D., University of Michigan, Ann Arbor, MI, USA.

  2. M. Tahir Nawaz, Nadeem Ehsan, “ Role of Female Employee’s in Apparel Industry of Pakistan”, (Accepted for Publication in Pakistan Journal of Science)

  3. M. R. Saleem, Dr. Nadeem Ehsan, Z. M. Khan, M. B. Khan, “Photonic Band Gap Structures of Nano-Polymer Composite”, Proceedings IBCAST 2009, Pakistan (UP)

  4. Nadeem Majeed, Muhammad Tahseen Majeed and Dr. Nadeem Ehsan, “Risk Analysis and Management in IT Industry of Pakistan”,CICM January 02-03, 2008, Lahore – Pakistan

  5. “Design of Unmanned Intelligent Vehicle for Bio-Sphere Monitoring” Nadeem Ehsan et.al, Report, University of Michigan, Ann Arbor, MI, USA. (Program funded by NASA, USA).

  6. Spittler, J.R., C.D. Kim, N. Ehsan, R.I. Carr, "Urban Bus Transit Impact on Flexible Pavement Condition and Life Cycle Costs, Preliminary Background," October, 1989, 105 pp

  7. Dr. Nadeem Ehsan, Ebtisam Mirza, M. Ahmed, “ Impact of Computer-mediated communication on virtual Teams Performance : An empirical study”, Information Technology, 2008, ITSim 2008, Kuala Lumpur, ISBN : 978-1-4244-2327-9

  8. Nadeem Ehsan, Sohail Anwar, Muhammad Talha,“ Professional Ethics in Construction Industry of Pakistan”, Proceedings of the World Congress on Engineering 2009 Vol I, WCE 2009, July 1-3 2009, London, U.K.

  9. Gillespie, T D, Karamihas, S M, SAYERS, M W, Nasim, M A, Hansen, W. Ehsan, N, Cebon, D, “”EFFECTS OF HEAVY-VEHICLE CHARACTERISTICS ON PAVEMENT RESPONSE AND PERFORMANCE”. 1993, Issue 353 , ISSN: 0077-5614

  10. Shazia Nauman, Azhar Mansur Khan, Nadeem Ahsan ‘”Patterns of Empowerment and Leadership Style in Project Environment” Journal: International Journal of Project Management, JPMA1189, DOI, 10.1016/j.ijproman.2009.11.013.

  11. Ilyas Mahmood A Qureshi, Khalid Mahmood, Dr. Nadeem Ehsan, Ebtisam Mirza 2010 "Applicability of Standards for Pakistani R&D Organizations"Asia Pacific Business Innovation & Technology Management onference ISBN : 978-971-94544-0-3

  12. Dr. Nadeem Ehsan, Usman Ghani, Shafqat Malik, Hasan Sikandar Rana 2010 "Importance of emotional intelligence in technical outfit of military establishment" Asia Pacific Business Innovation & Technology Management Conference ISBN : 978-971-94544-0-3

  13. Dr. Nadeem Ehsan, Ebstisam Mirza and Afshan Naseem 2010 "Perceptions of Fast Food Restaurants in Pakistan: What affects Customer’s Satisfaction?" Asia Pacific Business Innovation & Technology Management Conference ISBN : 978-971-94544-0-3

  14. Dr. Nadeem Ehsan, Bilal Mehmood, Khurram Raiz, Ebtisam Mirza 2010 “A competitive analysis of “Quality of Software Product” using” House of Quality Matrix” Asia Pacific Business Innovation & Technology Management Conference ISBN : 978-971-94544-0-3

  15. Dr. Nadeem Ehsan, Zeeshan Rabbani, Muhammad. Khalil 2010 " Identification of Road Traffic Congestion using GSM Network" Asia Pacific Business Innovation & Technology Management Conference ISBN : 978-971-94544-0-3

  16. Dr. Nadeem Ehsan, Gohar Majeed, Ebtisam Mirza, Azam Ishaq 2010 “Manufacturing Modern Structures: A Drift in Materials and Manufacturing Technologies” Asia Pacific Business Innovation & Technology Management Conference ISBN : 978-971-94544-0-3

  17. Dr. Nadeem Ehsan, Sameer Ahmed, Farah Akhtar, Ebtisam Mirza 2010"Score Normalization in Voice Biometrics: Comparison of Different Techniques Used for Score Normalization in Speaker Verification and its Application in Pakistan" Asia Pacific Business Innovation & Technology Management Conference ISBN : 978-971-94544-0-3

  18. Dr. Nadeem Ehsan, Sameer Ahmed and Hammad Raza 2010 "Total Quality through Forecasting and Optimization of Human Resource in Public Organization” Asia Pacific Business Innovation & Technology Management Conference ISBN : 978-971-94544-0-3

  19. Dr. Nadeem Ehsan, Shahzad Gul, Abdul Basit, Ebtisam Mirza 2010 "Up gradation Project for New Services of Core Networks in Local Telecom Company" Asia Pacific Business Innovation & Technology Management Conference ISBN : 978-971-94544-0-3

  20. N.Ehsan, A. Syed Abbas, S. Zafar Ali, E. Mirza, A. Akhtar “Effective Implementation Strategy for ERP Solution in Pakistani Enterprises” International Association of Technology, Education and Development INTED2010 Spain ISDN:978-84-613-5538-9

  21. N. Ehsan, I. Ahmad Bhatti, H. Tahir Mehmood, M. Wasim Bhatti “Comparison of Professionalism between Engineers, Doctors and Managers” International Association of Technology, Education and Development INTED2010 Spain ISDN:978-84-613-5538-9

  22. Ali, N. Ehsan, E. Mirza “Conventional Medical Care and E-Hospital Applications in Healthcare Sector of Pakistan” International Association of Technology, Education and Development INTED2010 Spain ISDN:978-84-613-5538-9

  23. N. Ehsan, S. Saadat Kakakhel, S. Ashraf, Z. Sarwar “Impacts of Gender Discrimination on the Motivation of Female Employees” International Association of Technology, Education and Development INTED2010 Spain ISDN:978-84-613-5538-9

  24. M. Rauf Khan, M. Haider, A. Hussain, N. Ehsan, E. Mirza “Assessment of Project Management Maturity in Public Sector R&D Organizations of Pakistan” International Association of Technology, Education and Development INTED2010 Spain ISDN:978-84-613-5538-9

  25. M. Ajmal Khan, N. Ehsan, H. Rehman, E. Mirza, A. Ishaque “Impact of Quality Certification on Software Industry of Pakistan” International Association of Technology, Education and Development INTED2010 Spain ISDN:978-84-613-5538-9(UP)

Dr. Daniel Saeed Pirzada
  1. D Pirzada, G.J. Cheng, 2009, “Microstructure and Texture Developments in Multiple Pulses Excimer Laser Crystallization of GaAs Thin Films”, Journal of Applied Physics, Issue 9, pp. 093114.

  2. G.J. Cheng, M. Cai, D. Pirzada, M. F. Guinel, G. M. Norton, 2008, “Plastic Deformation in Silicon Crystal induced by Heat Assisted Laser Shock Peening”, ASME Transaction Journal of Manufacturing Science and Engineering, pp. 11008.

  3. D. Pirzada, G.J. Cheng, D. Field, 2007, “Effect of film thickness and laser energy density on the structural characteristics of laser-annealed polycrystalline gallium arsenide films”, Journal of Applied Physics, 102, pp. 013519.

  4. G.J. Cheng, D. Pirzada, M Zhou, 2007, “Microstructure and mechanical property characterizations of metal foil after microscale laser dynamic forming ”, Journal of Applied Physics, Vol.101 (6), pp. 063108.

  5. J. Cheng, D. Pirzada, and P. Dutta, 2005, “Design and Fabrication of Hybrid Nanofluidic Channel,” Journal of Microlithography, Microfabrication and Microsystems, Vol. 4(1), pp.013009.

  6. J. Cheng, D. Pirzada, P. S. Mohanty and A. Bandyopadhyay, 2005, “Bioceramic Coating of Hydroxyapatite on Metallic substrate with Nd-YAG laser”, Materials Science and Engineering, C, Vol. 25 (4), pp. 541-547.

  7. J. Zhang, D. Pirzada, C.C. Chu and J. Cheng, 2005, “Fatigue Life Prediction of Sheet Metal after Laser Forming”, Journal of Manufacturing Science and Engineering, Vol. 127, pp. 1-8.

  8. G.J. Cheng, D. Pirzada, “Structural Characterizations on Microscale Laser Dynamic Forming Of Metal Foil”, Journal of Applied Physics, (USA), Vol.101 (6), 063108.( 2007).

  9. G. J. Cheng, D. Pirzada, D. Bahr, “Mechanical Property Enhancement of Silicon Component with Laser Shock Peening”, Journal of Minerals, Metals and Materials (JOM) (USA), Vol. 56(11), p. 140, (2005).

  10. Muhammad Daniel Saeed Pirzada, Farkhanda Nahid Pirzada, "The Carbon Capture and Sequestration: Technology Overview", Nucleus 2009.

  11. Daniel Pirzada, Farkhanda Pirzada, “E- Waste: An Impending Challenge (Accepted for Publication in Nucleus)

  12. Gary Cheng, D. Pirzada, “Numerical Simulation on Short Pulsed Laser Heating of Semiconductor Thin Films: The Case of GaAs”, IMECE2006-16214, ASME Proceedings, (USA), (2006)

  13. D. Pirzada, S.S. Khan, “Trends in Advanced Ceramics”, Proceedings of 1st National Symposium on Modern Trends in Contemporary Chemistry, pp. 279-284 (1990). [Conference Proceedings].

  14. M.D.S. Pirzada, S.N. Patankar, and F.H. (Sam) Froes, “Mechanochemical Processing of Nanocrystalline Ti-6Al-4V Alloy”, Metallurgical & Materials Transactions (USA), p. 1899-1903, (June 2004).

  15. D. Pirzada, E.G. Baburaj, R. Govindaraju and F.H. Froes, “Laser Surface Coating of TiC On H13 Die Steel: Effects on Corrosion and Erosion Behaviour”, Surface. Engineering (UK), 16 (2), , p. 164. (2000).

  16. Gary Cheng, D. Pirzada, “Effect of Film Thickness and Laser Energy Density on the Structural Characteristics of Laser-Annealed Polycrystalline Gallium Arsenide Films”, IMECE2006-16247,ASME Proceedings, USA, (2006).

  17. D. Pirzada, E.G. Baburaj, M.R. Govindaraju, and F.H. Froes, “Performance of TiC Laser Engineered Coatings in Molten Aluminum Environment”, Surface Engineering in Materials Science I, (USA) (2000) [Conference Proceedings], pp. 447-453.

  18. O.N. Senkov, V. Stolyarov, R.Z. Valiev, M.D.S. Pirzada, J. Liu, and F.H. (Sam) Froes, “New Approach to Hardening of Al-Fe Alloys”, Synthesis of Lightweight Metals III”, pp. 129-135, TMS, (USA) (1999), [Conference Proceedings]

  19. Farkhanda Pirzada, T. Riffat, D. Pirzada, “Environmental Friendly Solutions of Plastic Waste Management”, Environmental Pollution, Proceedings of 3rd National Symposium on Modern Trends in Contemporary Chemistry, pp. 381 (1997), [Conference Proceedings].

  20. M. Javed Hyder, M. D. Pirzada, “Application of Electrical Potential for Creep Study”, Proceedings of 11th National Conference on Engineering Fracture Mechanics”, Mehran University of Engineering & Technology”, Jamshoro. (Feb.1996), [Conference Proceedings].

  21. D. Pirzada, Asim B. Aziz, “Production of Electrolytic Copper Powder”, Proceedings of 1st National Symposium on Modern Trends in Contemporary Chemistry, pp. 271-278 (1990), [Conference Proceedings].

Dr. Irfan Anjum Manarvi
  1. Perspectives from Europe and Asia on engineering design and manufacture: A comparison of engineering design and manufacture in Europe and Asia

  2. Muhammad Syed-ul Haque and Irfan Anjum Manarvi, “Reflections on Knowledge Value Life Cycle (KVLC)”, Global Journal of Management and Business Research GJMBR Vol 10, Issue 7: August/Sept. 2010 http://www.globaljournals.org

  3. Usman Munir, Irfan Manarvi, “Information Security Risk Assessment for Banking Sector-A Case study of Pakistani Banks” Global Journal of Computer Science and Technology Vol 10, Issue 8: July/August 2010, http://www.globaljournals.org

  4. Saima Kanwal, Irfan Manarvi, “Evaluating ERP Usage Behavior of Employees and Its Impact On Their Performance: A Case Of Telecom Sector” Global Journal of Computer Science and Technology, Vol 10, Issue 7: July/August 2010, http://www.globaljournals.org

  5. Muhammad Syed ul Haq, Irfan Manarvi, “Knowledge Value Life Cycle (KVLC) Determining Parameters of Valuing Knowledge, Accepted for publishing in International Journal of Knowledge, Culture and Change Management 2010

  6. Muhammad Rashid, Irfan Manarvi, “Competitive Advantage of Procurement from OEM’s and Local suppliers in Pakistan Aviation Industry”, Accepted for publishing in International Journal of Engineering Management and Economics, Second Issue, Italy 2010.

  7. Abida Ellahi, Irfan Manarvi, “Understanding Attitudes towards Computers use in Police Department of Pakistan”, Electronic Journal of Information Systems in Developing Countries, Volume 42, 2010 Hong Kong. http://www.ejisdc.org/ojs2/index.php/ejisdc

  8. Manarvi, I.A, Neal Juster, “Framework of an integrated tolerance synthesis model and using F E simulations as a visual tool for tolerance allocation in assembly design” , ELSEVIER, Journal of Material Processing Technology, Volume 150, pp 182-193, 2004 http://www.elsevier.com/locate/jmatprotec

  9. Irfan Manarvi, Waqar Muhammad, “Analysing defects of C-130 aircraft through datamining of aircraft history”, Published in IEEE Aerospace Conference Bozeman, Montana USA, March 2010-06-18, http://www.aeroconf.org/

  10. Aamir Hanif, Irfan Anjum Manarvi, “ Investigating the Implementation of Balanced Scorecard in Pakistani Small Enterprises”, 2010 IEEE International Conference on Advanced Management Science IEEE ICAMS 2010, Chengdu, China, http://www.iacsit.org/iccrd/index.htm

  11. Raza, I.; Manarvi, I.; “Factors motivating educated women to adopt professional life”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1446 – 1451

  12. Khawaja, K.F.; Manarvi, I.; “Evaluating customer perceptions towards ATM services in financial institutions; A case study of Pakistani Banks”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1440 – 1445

  13. Hanif, A.; Manarvi, I.A.; Performance based segmentation of small and medium enterprises: A data mining approach Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1509 – 1513

  14. Fahim-ul-Aqib, J.M.; Manarvi, I.; Ahmed, J.; Khan, K.; Zafar, S.; “A methodology of finding investment opportunities in South Asia through data mining and decision analysis”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1505 – 1508

  15. Khan, R.K.; Manarvi, I.; Mohay-ud-din Evaluating performance of Blackcaps of New Zealand vs. global cricket teams, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1500 – 1504

  16. Raza, H.; Manarvi, I.; Ahmed, J.; Khan, K.; ur Rehman, K, “A methodology of export sectors identification through data mining”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1496 - 1499

  17. Mahmood, S.; Manarvi, I.; “Establishing the traits for best performing employee selection in telecom sector through data mining”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1490 – 1495

  18. Ahmad, I.; Manarvi, I.; Ashraf, N.; “Predicting university performance in a subject based on high school majors”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1475 - 1479

  19. Shahid, S.; Manarvi, I.; “ A methodology of predicting automotive sales trends through data mining”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1464 – 1469

  20. Manarvi, I.A.; Hameed, S.;, “ Joint collaboration models for small satellite design and development between client and OEM”, Aerospace conference, 2009 IEEE 7-14 March 2009 Page(s):1 – 8

  21. Hameed, M.S.; Manarvi, I.A.; “Using FEM and CFD to locate cracks in compressor blades for non destructive inspections”, Aerospace conference, 2009 IEEE 7-14 March 2009 Page(s):1 – 11

  22. Manarvi, M.A.; Ahmad, T.; “ A Methodology of Evolving User Requirements to Launch ERP in Aircraft Industry Environment”, Aerospace Conference, 2008 IEEE 1-8 March 2008 Page(s):1 – 21

  23. Mirza, W.; Manarvi, I.;”Laptop selection using data mining of critical features”,Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1485 – 1489

  24. Khan, S.A.; Manarvi, I.; “Selecting a sports car through data mining of critical features” Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1480 – 1484

  25. Zafar, S.; Manarvi, I.; Ahmed, J.; Khan, K.; ur Rehman, K.; “ Investment portfolio decisions for shares through data mining” Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1458 – 1463

  26. Kazmi, S.N.A.; Manarvi, I.; “A methodology of identifying factors influencing foreign direct investment in ICT industry”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1452 – 1457

  27. Rashid, M.; Manarvi, I.; “Vendor assessment and procurement decision making through data mining in aviation industry”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1470 – 1474

  28. Aamir Hanif, Irfan Anjum Manarvi, “Influence of Quality, Innovation and New Product/Services Design on Small and Medium Enterprises”, World Congress on Engineering 2009 (WCE 2009)London, U.K., 1-3 July, 2009

  29. Manarvi, I.A, Asif Rasheed:, “A Framework of Technology Diffusion in Aircraft manufacturing Industry Environment”, International Conference of Engineers and Computer Scientists 2008, , http://www.iaeng.org/IMECS2008, Hong Kong, 19-21 March, 2008

  30. Manarvi, I.A, Neal Juster ,” A Uni-Axial test rig approach for deformation analysis of flexible parts due to location type tolerance in assembly”, EASED 2004 http://www.dmem.strath.ac.uk/EASED2004, Xi’An China, 19-21 April 2004

  31. Manarvi, I.A, Neal Juster, “ Using FE simulations for flexible parts and assembly design in automotive industry” FISITA 2004 World Automotive Congress in http://www.fisita2004.com/, Barcelona Spain, June 2004

  32. Manarvi, I.A, Neal Juster, “Integration of optical scanning system and FE simulations for automated tolerance synthesis in a concurrent engineering environment”, 11th International Society of Productivity Enhancement (ISPE) conference http://isg.uninova.pt/ce2003/, Madeira, Portugal, 26th to 31st July 2003.

  33. Manarvi, I.A , Raj Balendra, “Prediction of wrinkling in sheet metals using a modified Yoshida test and wrinkle height measurement through CMM”, 11th International Society of Productivity Enhancement (ISPE) conference http://isg.uninova.pt/ce2003 Madeira, Portugal, 26th to 31st July 2003.

  34. Manarvi, I.A, Neal Juster, “Combining FE and tolerance synthesis for aesthetic assembly design of flexible components” 1st International Conference on Manufacturing Research ICMR 2003 at University of Strathclyde http://dmem1.ds.strath.ac.uk/icmr2003/. Glasgow, Scotland United Kingdom, 9th to 11th September 2003

  35. I.A. Manarvi, Neal P Juster, “ Using FE to simulate the effect of tolerance on part deformation” 10th International Society of Productivity Enhancement (ISPE) conference, Cranfield University United kingdom http://www.ceconf.com/ce2002/, 26th to 31st July 2002

Dr. Ali Ahsan
  1. Research Paper Published In Pakistan’s 1st National Conference On Quality Assurance In Education. Topic: TQM In Higher Education In Pakistan Co Authors: Dr. Ali Sajid

  2. Research Paper Published In 11th QMOD Conference Organized At Lunds University, Campus Helsingborg, Sweden From 20th August 2008 To 22nd August 2008 (Http://www.Ch.Lu.Se/Qmod). Topic: Exploring ‘Employee Satisfaction’ As A Quality And Productivity Enhancement Tool For IT Sector Of Pakistan Co Authors: Dr. Ali Sajid, Ms. Hina Sohrab Kiani And Ms. Omama Khurshid

  3. Research Paper Published In 7th WSEAS International Conference On Software Engineering, Parallel And Distributed Systems (SEPADS '08) Held In University Of Cambridge, Cambridge, UK From February 20th To February 22nd, 2008. Proceeding Published By WSEAS Press, ISBN: 978-960- 6766-42-8, ISSN: 1790-5117. (Also Available Through ACM Portal) Topic: Required Level Of Motivation To Revitalize The Workforce In Software Industry Of Pakistan Co Authors: Dr. Ali Sajid And Mr. M Wasim Bhatti

  4. Research Paper Published In 2nd International Conference On Knowledge Generation, Communication And Management: KGCM 2008, June 29th - July 2nd, 2008 – Orlando, Florida, USA. Topic: Supervisory Divergence Between South Asian & Chinese Middle Management Standpoint And Its Operational, Motivational & Unconstructive Long Term Significant Consequence In Technical Organizations In South Asia Co Authors: Dr. Ali Sajid

  5. Research Paper Published In IEEE International Engineering Management Conference, A Strategic View Of Engineering And Technology Management Held At St. John’s, Newfoundland & Labrador Canada. The Conference Was Organized By IEEE Engineering Management Society, IEE Management Professional Network, IEEE Newfoundland & Labrador Section And IEEE Canada. The Conference IEEE Catalog Number Is 05ch37681c And ISBN Number Is 0-7803-9140-3. Topic: Managing Social Values & Hi-Tech Corporate Practices In South Asia Through Better Understanding Of Corporate Social Responsibility Co Authors: Dr. Ali Sajid

  6. Research Paper Published In 4th International Symposium On Management, Engineering And Informatics: MEI 2008 In The Context Of The 12th Multi-Conference On Systemics, Cybernetics And Informatics: WMSCI 2008 June 29th - July 2nd, 2008 – Orlando, Florida, USA: MEI 2008, June 29th - July 2nd, 2008 – Orlando, Florida, USA. Topic: Operational Barriers To Transfer Of Technology For Large Scale IT Based Organizations From China To Pakistan Co Authors: None

  7. Research Paper Published in The 5th International Symposium on Management, Engineering and Informatics: MEI 2009 In the Context of The 13th Multi-conference on Systemics, Cybernetics and Informatics: WMSCI 2009, July 10th - 13th, 2009 – Orlando, Florida, USA. Topic: Impact of Discrepancies in Effective Written Communication on Organizational Quality of Geographically Dispersed Software Organizations in Software Industry of Pakistan Co Authors: Mr. Adnan Akram

  8. Research Paper Published in IEEE The 17th International Conference on Industrial Engineering and Engineering Management, Xiamen, P.R. China, October 29th to 31st, 2010. IEEE Catalog Number: CFP1016G-PRT, ISBN: 978-1-4244-6481-4. Conference proceedings are indexed by both EI Compendex and ISTP. Topic: The Rise And Fall of R & D Center’s ‘Quality Management Department’ of a Major ICT Based Chinese Organization in Pakistan: An Exploratory, Explanatory and Analytical Case Study of Core Reason of Rise and Fall and Corresponding Soft Benefits And Dis-benefits for The Overall Organization Co Authors: Mr. None

  9. One paper under review by journal ‘Journal of Statistics’ by GCU. (In Pipeline)

  10. Software Development Process Standardization & Continuous Improvement Using the Quality Tools. (In Pipeline)

  11. Speaker in several conferences in Pakistan held by IEEE, NUST, CASE, FUI, American Embassy (Pak), IIIS. (In Pipeline)

  12. Research Paper Published in IEEE The 17th International Conference on Industrial Engineering and Engineering Management, Xiamen, P.R. China, October 29th to 31st, 2010. IEEE Catalog Number:CFP1016G-PRT, ISBN: 978-1-4244-6481-4. Conference proceedings are indexed by both EI Compendex and ISTP. Topic: Investigation and Discovery of Core Issues Concerning Requirements Elicitation in Information Technology Industry and Corresponding Remedial Actions (An Inductive Case Study of Pakistan’s IT Industry) Co Authors: Mr. Imran Ashraf

  13. Research Paper Published in IEEE The 17th International Conference on Industrial Engineering and Engineering Management, Xiamen, P.R. China, October 29th to 31st, 2010. IEEE Catalog Number: CFP1016G-PRT, ISBN: 978-1-4244-6481-4. Conference proceedings are indexed by both EI Compendex and ISTP. Topic: Scrum Adoption, Acceptance and Implementation (A Case Study of Barriers in Pakistan’s IT Industry and Mandatory Improvements) Co Authors: Mr. M Jamil Akhtar and Mr. Waqas Zafar Sadiq

  14. ISI Recognized Journal. Extended Version of The Original Research Paper Was Selected For Inclusion In Journal I.E. ‘WSEAS Transactions On Computers’. ISSN: 1109-2750, Issue 6, Volume7, Pg 837-846, June 2008. (Also Available Through ACM Portal) Topic: A Framework To Identify The ‘Motivational Factors’ Of Employees; A Case Study Of Pakistan IT Industry Co Authors: Dr. Ali Sajid And Mr. M Wasim Bhatti

  15. HEC Recognized Journal. ‘The Nucleus’. ISSN: 0029-5698, Volume 47, No.2 (2010), Pg 91-123. (Also Available from http://www.thenucleuspak.org.pk) Topic: Barriers Against Implementing And Managing Quality In IT Industry Of Pakistan Co Authors: None

Dr. Asim Nisar
  1. 3. Ashraf, M.W., Tayyaba, S., Afzulpurkar, N., Nisar, A., Tuantranont, A., Bohez, E.L.J. "Coupled Multifield Analysis of Piezoelectrically Actuated Microfluidic Device for Transdermal Drug Delivery Applications" (2010), Proceedings of World Academy of Science, Engineering and Technology 62, pp. 656-660. ISSN:20703740

  2. Muhammad Waseem Ashraf, Shahzadi Tayyaba, Nitin Afzulpurkar, Asim Nisar "Fabrication and Analysis of Tapered Tip Silicon Microneedles for MEMS based Drug Delivery System" (2010) Sensors & Transducers Journal (ISSN 1726- 5479) Vol: 122, Issue 11, November 2010 pp:158-173 (Journal) HEC Recognized:Yes (E-Impact Factor 205.767). Ten best articles published in 2010 in Sensors and Transducers Journal.

  3. Ashraf, M.W, Tayyaba, S., Nisar, A., Afzulpurkar, N.,Bodhale, D.,Lomas, T.,Poyai, A.,Tuantranont, A. "Design, Fabrication and Analysis of Silicon Hollow Microneedles for Transdermal Drug Delivery System for Treatment of Hemodynamic Dysfunctions" (2010) Cardiovascular_Engineering_ 91–108 Volume 10, Number 3, September,_2010

  4. M.W. Ashraf, S. Tayyaba, Asim Nisar, N. Afzulpurkar "Design, Analysis and Fabrication of MEMS-based Silicon Microneedles for Bio-Medical Applications" (2010) The ECTI transactions on electrical eng., electronics, and communications (Print ISSN 1685-9545). Page(s): 83 – 91, ECTI Transaction EEC Vol 9, No 1 (2011) HEC Recognized:Yes. ECTI Transaction EEC Vol 9, No 1 (2011).http://www.ecti-thailand.org/paper/journal_viewlist/34

  5. Dhananjay W. Bodhale, Asim Nisar, Nitin Afzulpurkar "Structural and microfluidic analysis of hollow side-open polymeric microneedles for transdermal drug delivery applications," (2010) Microfluidics and Nanofluidics Vol:Microfluidics and Nanofluidics, 2010, Volume 8, Number 3, pp:373-392 (Impact Factor 3.286).

  6. Nisar, A., Afzulpurkar, N. "Three Dimensional, Multifield Analysis of a Piezoelectric Micropump for Drug Delivery System for Treatment of Hemodynamic dysfunction." (2008) Cardivascular Engineering Vol:8 pp:203-218. Springer Netherlands.

  7. Nisar, A. Afzulpurkar,N. "Multifield Analysis of a Piezoelectrically Actuated Valveless Micropump" (2008) Sensors & Transducers Journal Vol:94 pp:176-195. (E-Impact Factor 205.767) (Cited 3 times in Scopus)

  8. Nisar A., Afzulpurkar,N. Mahaisavariya "MEMS Based Micropumps in Drug delivery

  9. Nisar A., Afzulpurkar,N. "Design Optimization of MEMS Micropump for Drug Delivery Applications" (2007) Extended summary, Review of advancements in Micro and Nano Technologies (SCI indexed Journal), Vol:In Press.

  10. A. Nisar, M.J.J.Schmidt, M.A.S "Finite element analysis for the prediction and optimization of residual stresses caused by laser enamelling process" (2003) IMech. Proc. Part B. Journal of Engg. manufacture Vol:217 pp:1085-1099 (Impact Factor 0.412) (Cited 1 time in Scopus)

  11. A. Nisar, M.J.J.Schmidt, M.A.S "Three-dimensional transient finite element analysis of laser enamelling process with moving heat source and phase change considerations" (2003) Proc. Instn. Mech. Engrs, Part-B Vol:217 pp:753-764 (Impact Factor 0.412) (Cited 7 times in Scopus)

  12. Abid Iqbal*, Shafaat A.Bazaz, M. Shuja Khan, Asim Nisar, Monolithic Tri-axis Nickel based Accelerometer design verified through physical and behavioral simulations, submitted to Journal of Microsystems Technology, Springer (Impact Factor 1.025) (Journal Publications under review)

  13. Dhananjay W. Bodhale, Asim Nisar, Inertial focusing of cell/particles in varying radius radii curved microchannel for microflow cytometry in biomedical applications, Manuscript in Preparation. To be submitted to Microflow Cytometry-Part A (Impact Factor 3.032) (Working Journal Paper Manuscripts)

  14. H.M. Usman Sani, M. Yaqub, Asim Nisar "Design & Simulation of MEMS based Piezo-resistive Pressure Sensor using Hybrid Simulation Technique" (2011) 8th IBCAST: Control & Signal Processing, January 10-13, 2011, Accepted Manuscript. http://www.ibcast.org.pk/csp.htm

  15. Shahzadi Tayyaba, Muhammad Waseem Ashraf, Nitin Afzulpurkar, Asim Nisar, “Optimization of Fabrication Process for MEMS based Microneedles Using ICP Etching Technology”, 2010 6th International Conference on MEMS NANO, and Smart Systems, ICMENS 2010. December 14 - 15, 2010, Changsha, China. Accepted Manuscript

  16. Ashraf, Muhammad Waseem; Tayyaba, Shahzadi; Nisar, Asim; Afzulpurkar, Nitin; "MEMS based system for drug delivery," Emerging Technologies (ICET), 2010 6th International Conference on , vol., no., pp.82-87, 18-19 Oct. 2010 doi: 10.1109/ICET.2010.5638375

  17. Tayyaba, Shahzadi; Ashraf, Muhammad Waseem; Nisar, Asim; Afzulpurkar, Nitin; Muhammad Naim Ashraf; , "Simulation of dual radii polymeric microneedle array for blood extraction," Emerging Technologies (ICET), 2010 6th International Conference on, vol., no., pp.110-113, 18-19 Oct. 2010 doi: 10.1109/ICET.2010.5638372

  18. Asim Nisar, N. Afzulpurkar , D. W. Bodhale, A. Tuantranont and Muhammad Waseem "Coupled MultiField Analysis with Fluid-Structure Interaction and Fabrication of MEMS based Microfluidic Devices for Biomedical Applications" (2010) Proceedings of International Bhurban Conference on Applied Sciences & Technology, Islamabad, Pakistan, January 11-14, 2010. Vol 1, pp. 127-133. ISBN 978-969-8741-08-2

  19. D.W. Bodhale, A. Nisar, N. Afzulpurkar " Design, fabrication and analysis of silicon microneedles for transdermal drug delivery applications" (2010) Proceedings of the 3rd International Conference on the Development of BME in Vietnam, BME2010 January 11 - 14th, 2010, Ho Chi Minh City, VIETNAM, IFMBE Proceedings, Publisher Springer Berlin Heidelberg,Pages 84-89, SpringerLink Date Saturday, April 03, 2010

  20. Ashraf, M.W. Tayyaba, S. Nisar, A. Afzulpurkar, N. Tuantranont "MEMS based Biomedical Microfluidic Device" (2010) International Conference on Automation, Robotics and Control Systems (ARCS-10), pp. 23-28. July 2010 in Orlando, FL, USA. http://www.promoteresearch.org/2010/proceedings-listing-2010/arcs10.html

  21. Ashraf, M. W.; Tayyaba, S.; Afzulpurkar, N.; Lomas, T.; Tuantranont, A.; Nisar, A.; Bohez, E. L. J "Design, Analysis and Fabrication of MEMS-based Silicon Microneedles for Bio-Medical Applications" (2010) Electrical Engineering/Electronics Computer Telecommunications and Information Technology (ECTI-CON), 2010 International Conference on , vol., no., pp.950-953, 19-21 May 2010, ChangMai, Thailand Vol 5491394 pp:950-953 (Best Paper Award)

  22. Ashraf, M.W.; Tayyaba, S.; Afzulpurkar, N.; Nisar, A.; Bohez, E.L.; Tuantranont, A.; , "Structural and microfluidic analysis of MEMS based out-of-plane hollow silicon microneedle array for drug delivery," Automation Science and Engineering (CASE), 2010 IEEE Conference on , vol., no., pp.258-262. Marriott Eaton Centre Hotel, Toronto, Ontario, Canada, 21-24 Aug. 2010 doi: 10.1109/COASE.2010.5584012 (SLAS Young Scientist Award Finalist)

  23. M.W., Tayyaba, S.; Nisar, A.; Afzulpurkar, N.; Tuantranont, A "Coupledfield microfluidic analysis of integrated MEMS based device for transdermal drug delivery applications" (2009) Multitopic Conference, 2009. INMIC 2009. IEEE 13th International , vol., no., pp.1-6, 14-15 Dec. 2009, doi: 10.1109/INMIC.2009.5383101

  24. Dhananjay Bodhale, Asim Nisar, Nitin Afzulpurkar, “Coupled Multifield Analysis of Microneedle Based Piezoelectrically Actuated Microfluidic Device for Transdermal Drug Delivery Applications”, Multibody Dynamics 2009, An ECCOMAS Thematic Conference 29th June - 2nd July 2009, Warsaw University of Technology. www.multibody2009.org

  25. Nisar, A.; Afzulpurkar, N.; Mahaisavariya, B.; Tuantranont, A.; , "Multifield Analysis Using Multiple Code Coupling of a MEMS Based Micropump with Biocompatible Membrane Materials for Biomedical Applications," BioMedical Engineering and Informatics, 2008. BMEI 2008. International Conference on , vol.1, no., pp.531-535, 27- 30 May Sanya China. doi:10.1109/BMEI.2008.320. (Cited 3 times in Scopus)

  26. Nisar.A., Nitin Afzulpurkar "Design Optimization of MEMS Micropump for Drug Delivery Applications" (2007) Proceedings of the First IEEE International Conference on Nano/Molecular Medicine and Engineering -NANOMED, 2007, Macau, China.

  27. Asim Nisar, Abdul Manan, Syed Tauqeer-ul-Islam, "Using CFD and FEM Analysis to Establish Qualification Benchmarks for High Pressure Die Cast Aluminium Parts for Aerospace Applications " (2005) Proceedings of 9th International Symposium on Advanced Materials (ISAM)- 2005, Islamabad, Pakistan, September 19- 22, 2005. Vol:ISBN 969-8122-17-6 pp:578-582.

  28. Asim Nisar, M.J.J.Schmidt, M.A.S "Finite element analysis for the prediction and optimization of residual stresses caused by laser enamelling process”, Proceeding of First International workshop on Applications of Emerging Technologies in manufacturing Engineering (2003), Islamabad pp. 220-254. Published by National University of Sciences and Technology, NUST, Pakistan.

  29. Finite element modelling of laser tile grout sealing process, Asim Nisar, M.A. Sheikh (Dr), Lin Li (Prof), UMIST. Department of Mechanical, Aerospace and Manufacturing Engineering,UMIST, U.K, 2002. (Book)

Dr. Azhar Mansur Khan
  1. "India-Pakistan Free Trade", Presented at the South Asia Forum at Mahidol University Salaya Campus, Thailand Dec 5, 1998.

  2. Cost-Benefit Analysis of Supersonic Commercial Air Transportation", Unpublished Economics Masters Thesis, Georgia Institute of Technology, Atlanta Georgia, USA.

  3. Cost-Benefit Analysis of Manufacture of Vehicles in Pakistan”, A Paper Written in Present Capacity.

  4. National Budget and Defense Spending", Presented at the News Pre-Budget Seminar Pearl Continental Hotel Lahore. June 1996. Gist of My Talk was Published in the Newspaper.

  5. Technology Transfer and its Ill Effects for a Developing Country. A Paper Researched, Written and Presented as a Think Tank in Present Capacity.

  6. India Pakistan Trade”, The Economic Outlook Vol. 30, N0.1-2, Jan-Feb. 1999.

  7. Environment Protection, A Challenge for the Present Government”, Published in Daily ‘The News’, Dated 9 Nov 1999.

  8. Costs of Big Dams”, Published in Daily The News Dated 14 Dec 1999.

  9. Cost-Benefit Analysis of Construction of the Kalabagh Dam, The Pakistan Banker Volume 8 Nos. 1 & 2 January - December 1998. (Social and Environmental Aspects were Studied in Details).

  10. Brain Drain or Brain Circulation”, The NEWS and the Pakistan and Gulf Economist.

  11. Helicopter Performance Optimization with Quasi-linear Inflow Theory”, Presented at American Helicopter Society Specialists Conference on Optimization at Atlanta Georgia USA, April 1993.

  12. Helicopter Design for Heavy Lift”, All America Design Competition Sponsored by Sikorsky. Report Won the First Prize in the Whole USA. Rotor Performance and Helicopter Mission Optimization with Quasi-linear Inflow Theory”, Ph.D. Thesis at Georgia Institute of technology, Atlanta Georgia USA, 1992.

  13. Trade and Environment", Pakistan and Gulf Economist Vol. XXII, April 2000. Trade with India, Legalization of Illegal Trade", Pakistan and Gulf Economist Vol. XVIII, No. 13 March 29-April 4, 1999.

  14. Eco-Tourism Policy Framework for Pakistan", A Paper Presented at the United Nations During Final Session of the LEAD Program on 21 April 1999. [Also Attended at UN, the Proceedings of the CSD (Commission on Sustainable Development)].

  15. Cost-Benefit Analysis of Supersonic Transportation”, Under Publication in The Journals of Transportation, USA. (Environmental Impacts of Supersonic Air Transportation have been Researched in Details)

  16. Defense and Development”, A comprehensive unpublished study was done in a Military Course that Highlighted the Economic Burden of Defense Expenditure and Policy/Strategic Doctrine of Pakistan.

  17. Education and Knowledge”, Participated in the Panel Discussion and Represented Pakistan at the Conference of the World’s Scientific Academies, Tokyo International Forum. Tokyo Japan. 15-18 May 2000.

  18. University Industry Partnership for Economic Development of the Country", International Conference and Exhibition of Engineering Industry, Lahore Pakistan, Held on 29 - 31 May 2001 By the Export Promotion Bureau of Pakistan and the Asian Productivity Org. of Japan.

  19. Sustainability of Community Development/Rural Support Projects" Published in the 5th Edition of Sustainable development International, SDI, (SDI5-18/1), ICG Publishing Limited, 14 Graville Street, London EC1N 8SB, UK.

  20. Eco-Industrial Parks for the Developing Countries", A Research Paper Accepted to be Published in the Next Edition of Sustainable development International, SDI, (SDI5-18/1), ICG Publishing Limited, 14 Graville Street, London EC1N 8SB, UK.

  21. Environment Related Issues of Tanning Industries and their Economic Eradication – A Project Approach” Presented at International Conference on Pollution Control in Tanning Industry of Pakistan, June 11-13, 2002 Avari Hotel Lahore Pakistan.

  22. Development of a New Sustainable Development Model Called "Sustained Sustainability", to Ensure that the Development Interventions are Themselves Sustainable and When Funding of a Project Stops, the Project Should Not Stop.(Ongoing Research)

  23. "Poverty and Environmental Degradation", This Research is in the Context of Pakistan to Establish a Relationship Between State of Poverty and Environmental Condition in Various Parts of the Country through Statistical Data Correlation. (Ongoing Research)

  24. Environmental Impacts of Aviation Industry. (Ongoing Research)

  25. "Technology Development Projects for Rapid Industrial Growth of Pakistan", Working on Establishment of a Complete Mechanism for These Projects for Which the Government has Allocated About $ 300 Million. (Ongoing Research)

  26. Debt trap of Developing Countries in General and Pakistan in Particular. Debt Swap and Debt Absolution of HIPCs. (Ongoing Research)

  27. Free Market Environmentalism and Eco-Industrial Parks for the Developing Countries for their Sustainable Economic Development. (Ongoing Research)

  28. Incorporation of Negotiations Skills in the Project Management. (Ongoing Research)

  29. Causes of the Failure of Development Projects in Pakistan. (Ongoing Research)

Dr. Amer Farhan Rafique
  1. Amer Farhan Rafique, H LinShu. “Trajectory Optimization of Air Launched Satellite Launch Vehicle using Genetic Algorithm”. ICNPAA 2010 World Congress: 8th International Conference on Mathematical Problems in Engineering, Aerospace and Sciences

  2. Amer Farhan Rafique, H LinShu, M Ying, A Kamran, Q Zeeshan. “Performance Enhancement of Air Launched Satellite Launch Vehicle using Composite Motors”. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2010, AIAA 2010-2986. (EI Indexed)

  3. Amer Farhan Rafique, H LinShu, Q Zeeshan, A Kamran, K Nisar, XW Wang. “Integrated System Design of Air Launched Small Space Launch Vehicle using Genetic Algorithm”. 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2009, AIAA 2009-5506. (EI Indexed)

  4. Amer Farhan Rafique, H LinShu, Q Zeeshan, A Kamran, K Nisar, XW Wang. “Hybrid Optimization Method for Multidisciplinary Design of Air Launched Satellite Launch Vehicle”. 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2009, AIAA 2009-5535. (EI Indexed)

  5. Amer Farhan Rafique, H LinShu, Q Zeeshan, A Kamran. “Multidisciplinary Design and Optimization of Air-launched Satellite Launch Vehicle using Particle Swarm Optimization”. 18th WORLD IMACS Joint Congress and MODSIM09, 2009

  6. Amer Farhan Rafique, Q Zeeshan, H LinShu. “Conceptual Design of a Small Satellite Launch Vehicle using Hybrid Optimization”. International Conference on Nonlinear Problems in Aviation and Aerospace (ICNPAA), 2008.

  7. Amer Farhan Rafique, H LinShu. “Stability Research on Aerodynamic Configuration Design and Trajectory Analysis for Low Altitude Subsonic Unmanned Air Vehicle”. Asian Joint Conference on Propulsion and Power (AJCPP), Gyeongju, South Korea, 2008.

  8. Amer Farhan Rafique, S Tauqeer ul Islam, Z Mahfooz. “Store Release Simulation using Unsteady CFD Algorithm with Chimera Grid and Panel Methods”. International Bhurban Conference on Applied Sciences and Technology (IBCAST), 2005.

  9. Ali Kamran, L Guozhu, A F Rafique. “Design and Optimization of Slotted Tube Grain using Simulated Annealing”. ICNPAA 2010 World Congress: 8th International Conference on Mathematical Problems in Engineering, Aerospace and Sciences

  10. Ali Kamran, L Guozhu, A F Rafique, S Naz, Q Zeeshan. “Star Grain Optimization using Genetic Algorithm”. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2010, AIAA 2010-3084. (EI Indexed)

  11. Ali Kamran, L Guozhu, Q Zeeshan, A F Rafique. “Particle Swarm Optimizer for Finocyl Grain Configurations”. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2010, AIAA 2010-3083. (EI Indexed)

  12. Qasim Zeeshan, D Yunfeng, A F Rafique, A Kamran, K Nisar. “Multidisciplinary Robust Design and Optimization of Multistage Boost Phase Interceptor”. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2010, AIAA 2010-2920. (EI Indexed)

  13. Qasim Zeeshan, D Yunfeng, A F Rafique, A Kamran, K Nisar. “Multidisciplinary Design of Multistage Interceptor using Particle Swarm Optimization”. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2010, AIAA 2010-2849. (EI Indexed)

  14. Ali Kamran, L Guozhu, K Nisar, Q Zeeshan, A F Rafique. “Integrated Approach for Design and Optimization of Slotted Tube Grain Configurations”. 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2009, AIAA 2009-5514. (EI Indexed)

  15. Ali Kamran, L Guozhu, J Godil, Z Siddique, Q Zeeshan, A F Rafique. “Design and Performance Optimization of Finocyl Grain”. AIAA Modeling and Simulation Technologies Conference, 2009, AIAA 2009-6234. (EI Indexed)

  16. Qasim Zeeshan, D Yunfeng, S Ghumman, A F Rafique, A Kamran. “Support Vector Regression-driven Multidisciplinary Design Optimization of Multistage Ground Based Interceptor”. AIAA Modeling and Simulation Technologies Conference, 2009, AIAA 2009-6238. (EI Indexed)

  17. Qasim Zeeshan, D Yunfeng, A F Rafique, K Nisar, A Kamran. “Meta-heuristic Approach for the Conceptual Design and Optimization of Multistage Interceptor”. 18th WORLD IMACS Joint Congress and MODSIM09, 2009.

Dr. Faheem ul Islam
  1. Islam, Faheem ul. Image of Neighbourhood Retailing in Singapore: Gap Between Ideal Vs Actual. Temasek Journal, Singapore (June).

  2. Islam, Faheem ul. Validating the theory of clustering: The case of textile industry in Pakistan. Tanaka Business School, Imperial College, London, May 3-4, 2006.

  3. Islam, Faheem ul. Clustering in Pakistan's textile industry: Comparative analysis of the performance of clustered and non clustered firms. Judge Business School, April 24-25, 2006.

  4. Islam, Faheem ul. Developing and Sustaining Competitive Advantage Over One Hundred Years: Evolution of Faisalabad's Textile Industry Cluster in Paksitan. 10th Annual Global Conference of The Competitive Institute (TCI), Porland, Oregon, USA on October 8-12, 2007.

  5. Islam, Faheem ul. Impediments to the International Competitiveness of Pakistan's Textile and Clothing Industry in the Post MFA Environment. 4th Facing - East/Facing - West Conference held in Kalamazoo, Michigan, USA on June 15-16, 2007.

  6. Islam, Faheem ul. Agglomerating to compete in international markets: The case of small traditional cotton textile manufacturers in Faisalabad region of Pakistan. Annual Conference on Corporate Strategy in Vallendar, Germany on May 11-12, 2007.

  7. Islam, Faheem ul. Clustering in Pakistan's textile industry: Comparative analysis of clustered and non-clustered firms. Judge Business School, Cambridge, UK, May 2006. (Working Paper)

  8. Islam, Faheem ul. Building Competitiveness in three Decades: Post Independence Development of the Textile Industry Cluster in Faisalabad Region of Pakistan . Beyond Independence: South Asia 1947-1977 Conference held in London, UK on April 11-12, 2007

  9. Islam, Faheem ul. Insight into the dynamics of clustering in traditional industries in developing economies: The case of Faisalabad cotton textile cluster in Pakistan.", 9th Annual Global Confernece of TCI, Lyon, France, October 9-13, 2006.

  10. Islam, Faheem ul. ?Local Interdependency to Global Competitiveness: Socioeconomy of an agglomeration of SMEs in Transition Economy,? presentation at 9th Annual American Society for Competitiveness (ASC) Conference on Global Competitiveness in 21st Century, 6-8 November 2008, Orlando, Florida, USA.

  11. Islam, Faheem ul. ?Impact of Clustering on Innovation, Entrepreneurship and Organization of SMEs in Transition Economies,? presentation at 11 Annual Global Conference of the Competitiveness Institute (TCI), 29-31 October 2008, Cape Town, South Africa.

  12. Islam, Faheem ul. ?Socio-Economy of Innovation and Entrepreneurship in a Traditional Industry Cluster of an Emerging Economy,? presentation at 3rd European Conference on Entrepreneurship and Innovation, 15-16 September 2008, University of Winchester, UK.

  13. Islam, Faheem ul. ?Intrapreneurship in a Transition Economy Spatial Organization,? presentation at the British Academy of Management Conference BAM 2008, 9-11 September 2008, Harrogate, UK.

  14. Islam, Faheem ul. ?The impact of the case method on developing country executives? changing views of teaching and learning for their managerial skills development? presentation at The Inquiring Pedagogies iPED 2008 International Conference ? Researching Academic Visions and Realities, 8-9 September, 2008, University of Coventry, UK.

  15. Islam, Faheem ul. ?Entrepreneurship and SME development in Regional Clusters of Developing Countries? presentation at International Council for Small Business (ICSB) World Conference, 22-25 June 2008, Halifax Canada.

Dr. Jamil Yousaf
  1. "Lean Burn Natural Gas Fueled Engine: Engine Modification versus Hydrogen Blending", Dr M J Yousaf, University of Miami, Florida, USA. August 1993.

  2. "Natural Gas: A Better Choice", Dr M J Yousaf, presented at Energy

  3. Conservation Seminar at National University of Sciences and Technology, Rawalpindi, Pakistan. June 10-12, 1994.

  4. “Hythane: An Environment Friendly Automotive Fuel”, Dr M J Yousaf, Proceedings of 4th International Energy and Environment Conservation Symposium 1996, Islamabad, Pakistan. Dec 15-16, 1996

  5. In Cylinder Flame Front Growth Rate Measurement of Methane and Hydrogen Enriched Methane Fuel in a Spark Ignited Internal Combustion Engine", M J Yousaf, University of Miami, Florida, USA. August 1990.

  6. "Effects of Hydrogen Addition on Natural Gas Engine Operations", Dr M R Swain, Dr M J Yousaf & Dr M N Swain. SAE (Society of Automotive Engineer) Transactions, SAE paper # 932775, 1993. (SP 995)

  7. "An Approach to Lean Burn Natural Gas Fueled Engine Through Hydrogen Addition", Dr M J Yousaf, Dr M R Swain & Dr Z Dulger. Proceedings of 30th International Symposium on Automotive Technologies and Automation (ISATA) –Italy. Paper # 97EL081. June 14-18, 1997.

  8. “Proton Exchange Membrane with different Architectures used in Fuel Cells”, Ikhlaq Khattak & Dr Mirza Jamil Yousaf. Proceedings of 1st International Conference on Frontiers of Advanced Engineering Materials (FEAM-04), Lahore, Pakistan. Sept 20-22, 2004.

  9. “Environmental and Economic viability of Hydrogen Fuel Cells in Pakistan”, Dr Mirza Jamil Yousaf & Ikhlaq Khattak. Proceedings of ASME 2nd International Fuel Cell Science Engineering & Technology Conference, Munich, Germany. Oct 6 – 7, 2004

  10. “Design of Hydrogen Fuel cell AutoRickshaw”, Ikhlaq Khattak, Dr Mirza Jamil Yousaf & Dr Basharat Malik. Proceedings of ASME 4th International Fuel Cell Science Engineering & Technology Conference, Irvine, Ca, USA. Paper # FUELCELL2006 – 97249, pp 439 – 447. Jun 19 – 21, 2006

  11. “Reduction of Parasitics in Design of Hydrogen Fuel Cell Auto Rickshaw”, Ikhlaq Khattak, Dr Mirza Jamil Yousaf & Dr Abdul Ghafoor. Proceedings of ASME 6th International Fuel Cell Science Engineering & Technology Conference, Denver, Colorado. USA. Jun 16-18, 2008

  12. “Achieving Excellence through Quality Indicator and Productivity Improvement”, Syed Irshad Ali & Dr Jamil Yousaf, Pakistan Management Review, Journal of PIM, Pakistan. Vol. XLV No. 3, Third Quarter 2009.

Dr. Usman Mustafa
  1. Mustafa U, A. Qudus. 2010. “Globalizations and its Impacts on Agriculture, Food Security and Well Being of People in Pakistan”. In Gill S. S., Lakhwinder Singh and Reena Marwah (Edi.) “Economic and Environmental Sustainability of the Asian Region”. Routledge, India member of the Taylor and Francis Group, 912 Tolstoy House, 15-17 Tolstoy Marg, New Delhi 110 001, India.

  2. Mustafa U, Mirajul Haq, and I. Ahmad. 2009. “Consumer Perceptions, Practices, Willingness to Pay and Analysis of Existing Laws for Safe Drinking Water of Abbottabad District, Pakistan”. In Lin Heng Lye, Janet E Milne, Hope Ashiabor, Larry Kreiser, and Kurt Deketelaere (Ed.) “Critical Issues in Environmental Taxation”, Vol VII. Chapter VI. Water, Land, and Pollution Management. Oxford University Press, London. PP 395-412.

  3. Mustafa U, I. Ahmad, and Mirajul Haq. 2009. Solid Waste Management”. Technical Editors: Rebecca Roberts, Thushara Ranasinghe and Saima Baig. Published by International Union for Conservation of Nature (IUCN) Pakistan, Swiss Agency for Development and Cooperation (LDC), and PIDE. iv+20 pp.

  4. Mustafa U, Mirajul Haq, and I. Ahmad. 2009. “Environmental Fiscal Reform in Abbottabad: Drinking Water”. Technical Editors: Rebecca Roberts. Published by International Union for Conservation of Nature (IUCN) Pakistan, Swiss Agency for Development and Cooperation (LDC), and PIDE. iv+22 pp.

  5. Mustafa U. 2009. “Environmental Fiscal Reform in Abbottabad: “Fiscal Decentralization.” Technical Editors: Rebecca Roberts, Thushara Ranasinghe and Saima Baig. Published by International Union for Conservation of Nature (IUCN) Pakistan, Swiss Agency for Development and Cooperation (LDC), and PIDE. iv+ 24 pp

  6. Mustafa U, Mirajul Haq, and I. Ahmad. 2009. “Pro Poor Environmental Fiscal Reforms in Solid Waste Management Sector”. In “Peace and Sustainable Development in South Asia: Issues and Challenges of Globalization”. Sustainable Development Policy Research Institute (SDPI).

  7. Mustafa U. 2009. “Revenue and Expenditure: EFR in Abbottabad.” Technical Editors: Rebecca Roberts, Thushara Ranasinghe and Saima Baig. Published by International Union for Conservation of Nature (IUCN) Pakistan, Swiss Agency for Development and Cooperation (LDC), and PIDE. iv+32 pp

  8. Mustafa U. 2007. Solving the Urban Sprawl: A Case Study of Kot Lakhpat, Lahore. In NadeemUl Haque and Durr-e-Nayab (Ed.) “CITIES_Engine of Growth”. Pakistan Institute of Development Economics, Islamabad.

  9. Mustafa, U. 1998. “Manual on Participatory Monitoring & Evaluation of Development Projects, UNDP Area Development Project (PAK/96/005) Extension Services Management Academy, AJK.

  10. Veen M. V. D. and U. Mustafa. 1995. Training Material for ARP-II "Participatory Diagnostic Survey Training Course and Planning Workshop". ARP-II, BARB,GOB, The World Bank.

  11. Mufti, A. S. I. Ahmad; M. Afzal and U. Mustafa. 1986. "Accidents through Farm Machines and Implements". FMI, PARC, Islamabad.

  12. Mustafa U. and A. Qudus. 2008. “Globalization Driven Policies in Agriculture: An Impact Analysis”. Lahore Journal of Policy Studies. Vo.2 No.1. September 2008. pp 83-100.

  13. N. M. Beintema, W. Malik, M. Sharif, and U. Mustafa (2007). “Agricultural Science & Technology Indicators (ASTI). Country Brief . PAKISTAN. International Food Policy Research Institute (IFPRI), USA

  14. Mustafa U., M. Ali, and Ir. Heny Kuswanti. 2006. Chapter on Indonesia. In M. Ali (Ed.) “Food Chain Analysis: Setting Research Priorities in Asia” AVRDC – The World Vegetable Center. GTZ. P.O. Box 42, Shanhua, Tainan, Taiwan 74199, ROC. pp 145-196. http://www.avrdc.org/pdf/TB38/TB38_FactSheets.pdf

  15. Mustafa U., M. Ali, T. Satapornvorasak, and O. Dissataporn. 2006. Chapter on Thailand. In M. Ali (Ed.) “Food Chain Analysis: Setting Research Priorities in Asia”. AVRDC – The World Vegetable Center. GTZ. P.O. Box 42, Shanhua, Tainan, Taiwan 74199, ROC. pp 197-245 http://www.avrdc.org/pdf/TB38/TB38_FactSheets.pdf

  16. Mustafa U. 2005. “Major Lessons Learned For Enhancing The Competitive Edge of SMEs in International Marketing of Fruit And Vegetable". In B. Ahmad (Edi.) “International Marketing of Fruit and Vegetable”. Asian Productivity Organization, Japan. pp 35-40. http://www.apo-tokyo.org/projreps_acd/12_04-AG-GE-SEM-15.htm

  17. Mustafa U. 2010. “Global Governance Dealing with the Non-traditional Security Threats”. In “Non-Traditional Security Threats to Pakistan”. In Ahmad Rashid Malik (Edi.). Islamabad Policy Research Institute (IPRI) and Honns Seidel Foundation (HSF), Islamabad (In press)

  18. Rashid, G. M. Arif, and U. Mustafa. 2008. “Does the Labour Market Structure Explain Differences in Poverty in Rural Punjab?” Lahore Journal of Economics. Special Edition: September 2008. pp 139-162.

  19. U. Mustafa. 2007. “Environmental Fiscal Reforms and Decentralization for Sustainable Development and Poverty Eradication”. The Pakistan Development Review (PDR). 46:4. pp 1087-1103.

  20. Mirajul Haq, U. Mustafa, and I. Ahmad. 2007. “Consumer Perceptions, Practices, and Willingness to Pay for Safe Drinking Water: A Scenario Analysis of Urban and Rural Abbottabad”. The Pakistan Development Review (PDR) 46:4. PP 1137-1153.

  21. U. Mustafa, K. Abbas, and A. Saeed. 2005. Enhancing Vocational Training for Economic Growth in Pakistan. The Pakistan Development Review (PDR), V. 44 # 4. pp 567-584.

  22. Sharif, M., U. Mustafa, W. Malik and M. Iqbal. 2002. “Land Distribution and Renewal of Sustainable Economic Activities for Rural Poverty Alleviation in Pakistan”. International Journal of Agriculture and Biology. 1560-8530/2002/04-3-413-419.

  23. Mustafa, U., W. Malik and M. Sharif. 2001. “Globalization and Its Implications on Agricultural, Food Security and Poverty in Pakistan”. The Pakistan Development Review (PDR), V.40 # 4. pp 767-786.

  24. Mustafa, U. and M. A. Mir. 1999. “Sustaining Economic Development by Reforming Basic Institutions through Community participation”. The Pakistan Development Review (PDR), V.38 # 4. pp 1233-1246.

  25. Rodriguez A, N. A. Shah, M. Afzal, U. Mustafa and I. Ali. 1996. “Is Water-harvesting in Valley Floors a Viable Option for Increasing Cereal Production in Highland Balochistan, Pakistan? Experimenta; Agriculture, Elsevier Scuence B.V. Vol 32. pp 305-315.

  26. Mustafa, U., P. L. Pingali and J. C Flin. 1995. "Intensification Induced Degradation of Irrigated Infrastructure: The Case of Water-logging and Salinity in Pakistan in Pakistan". The Pakistan Development Review, Vol. 33, No. 4. pp 733-750.

  27. Rodriguez, A., I. Ali, M. Afzal, N. A. Shah, and U. Mustafa. 1995. Price Expectation of Sheep and Goats by Producers and Intermediaries in Quetta Market, Pakistan. Agricultural Economics. Elsevier Scuence B.V. 12 . pp 79-90.

  28. Mustafa, U., C. F. Habito, and B. J. Duff. 1993. "Macro-level Income and Employment Effects of Rice Farm Mechanizatio". Agricultural Mechanization in Asia, Africa and Latin America (Japan) Vol. 24. No. 1. pp 45-50.

  29. Mustafa, U. 1993. "Simulation Model for Distributions of Crop Yields Based on Farmer Perception - A Case Study from Highland Balochistan, Pakistan". The Pakistan Development Review, Vol. 32, No. 4,Winter, pp 799-806.

  30. Mustafa, U. 1992. "Consumption Linkages of Mechanical Wheat Production in Pakistan". The Pakistan Development Review, Vol. 31, No. 4, pp 929-936.

  31. Mustafa, U. 1988. "Impact of Farm Mechanization on Crop Production in Pakistan". Regional Net Work for Agricultural Machinery Newsletter, Manilla, Philippines. No. 32, ISS No. 115-5296. pp 6-7.

  32. Afzal, M., U. Mustafa and M. T. Ahmad. 1983. "Status of Selected Tillage Implements at the Progressive Farms in Pakistan". Agricultural Mechanization in Asia, Africa and Latin America (Japan) XIV, (2). pp 62-64 (Spring).

  33. Mustafa U. 2011. “Fiscal Federalism in Pakistan: 7th National Finance Commission Award and its Implications”. PIDE Working Paper 2011:77 (Working)

Dr. Memoona Rauf Khan
  1. Co-author, “Development Plan, Bahawalnagar District,” published by ActionAid, Pakistan, 1998.

  2. Co-author, “Mid-term Evaluation of the ActionAid Haripur Projects, 1998-1999,” published by ActionAid, Pakistan, 1998.

  3. with J. Roy Black. “Analysis of demand for Compost Attributes by Michigan Industries (MII),” Michigan State Agricultural Extension Department, 1995.

  4. Contributor to J. Roy Black. “Production Variability for Major Crops in Michigan and Illinois: Implications for Crop Insurance.” MI State Agricultural Extension Department, 1990.

  5. “Cost Recovery in the Pakistan Irrigation Projects,” prepared for the World Bank,1999.

  6. “Policy Issues in Cotton,” prepared for the World Bank,1999.

  7. “Computation of Cotton Parity Prices,” prepared for the World Bank,1999.

  8. Lead author, “Impact Assessment (Final) Report for Joint Satiana Project,” published by ActionAid, Pakistan 1998.

  9. Dr. Memoona Rauf Khan. “Outlier Analysis in Cross-sectional Data,” submitted to the Journal of Statistics, Government College University, Lahore, 2005.

  10. with J. Roy Black. “The Institutional and Technical Effect of Single and Multiple Irrigation Sources on Rice Productivity in Central Punjab,” Michigan State University, forthcoming 2005.

  11. Memoona R Khan. “Impact of Time/Distance Infrastructural Access to Secondary School on Gender Literacy Patterns in Central, Punjab, 1992,” submitted to the Journal of Applied Economics, Applied Economics Research Center, Karachi, 2005.

  12. with Wajid Pirzada. “Subsectoral Analysis of the Poultry Industry in Pakistan,” Journal of Science & Technology Policy & Scientometrics, July-December 2002, Volume 1, No 2 pp 58-78, Pakistan Council for Science and Technology, Islamabad.

  13. with Dr J.A Wicks, S. Parveen, M. Shahid. “Towards an Integrated Farm Management Survey of Pakistan: An Application to the Punjab Barani Tract,” Pakistan Journal of Social Sciences, Islamabad, December 1986.

  14. with J. Roy Black, Oehmke James. The Impact of Irrigation Systems on Rice Productivity in the Rice-Wheat Belt in Central Punjab.” Poster Paper presented at the Annual Meetings of the American Agricultural Economics Association, August 5-8, 2001, Chicago, U.S.A.

  15. “Participatory Project Formulation.” Paper published in the Conference Proceedings of the Seminar on Participatory Project Management, organized by ActionAid and UNDP, November 4, 1997, Islamabad, Pakistan.

  16. with James Oehmke. “Impact of Access to Marketing Infrastructure on Horticultural and Specialty Crop-Choice in C. Punjab, 1995.” Florida State Extension Department, U.S 1995.

  17. with James Oehmke. “Impacts of Access to Commercial and Educational Infrastructure on Off-farm Employment and Male/Female Education in C. Punjab, 1992.” Poster paper presented at the International Association for Agricultural Economists, Harare, Zimbabwe, August 1994. Abstract published in the Conference Proceedings.

  18. with Yasmin Shaukat. “A Simplified Accounting System for Co-operatives, an Extension Manual on Cooperative Management,” published by Federal Bank for Co-operatives, Islamabad, 1983.

  19. “Monitoring and Evaluation Indicators for Balochistan Community Irrigation and Agricultural Project,” prepared for the World Bank,1999.

Dr. Rashid Ahmed Khan
  1. Development of Management consultancy services In Private sector of Pakistan, Administrative Journal, PPARC, Islamabad. Vol 3, 1982

  2. Methods of ideas generation and creativity development, administrative journal, PPARC, Islamabad. Vol 5, 1983

  3. Study of a Public transport Service, Administrative Journal, PPARC, Islamabad.,vol 9,1983

  4. Productivity in Public sector of Developing Countries, administrative Journal, PPARC, Islamabad., vol,9,1984

  5. Micro Computer revolution, Computer Conference MS Division, Islamabad.

  6. Computer application in Inventory Management, computer Conference Ms Division, Islamabad.

  7. Applications of Operations Research and Optimization in the Public Sector Organizations, Regional Conference, Bahwalpur University,1990.

  8. A Framework for privatization, privatization Seminar, MS Division, Islamabad,1994

  9. Development of ECO and impact on CAR, Russian Federation, National Defence College 1995.

  10. Good Governance and performance based public Sector, Regional Seminar, planning Division, 1998

  11. Productivity Measurement in Pakistan Post Office, APO Tokyo,1989.